Here is the power of the BL5 or what it's limited to, for not blowing the speaker per amplifier Lower bass: 1000 watts/4ohm Upper bass: 650 watts/8ohm Midrange: 180 watts/8ohm Treble: 180 watts/8ohm I think the reason that BL9 has Class AB amp is because thy use the chassis from BL1 in it

well now it's out there so i might as well use my real pic... BTW "Van" cut be my twin...

Andy didn't you have a story to write on the workbench

Peter: Alex: And of course 'distortion free' at full volume because of the use of ICE Power! All you get is dynamic compression, rather than the normal fuzzy distortion which sounds terrible on other portable systems. I take it that that is ice in the alcohol that is making you forget that the BS3 has an class AB amplifier ! And stop imagining

Well in the mean time you can get a Power link to RCA connector so you can use the kikinoko sub

jandyt: After I had done I did the same as before and used cotton-wool soaked in meth's to clean any remnants off. Did also put them in the sink with some Fairy liquid ???

jk1002: Another thought is the floor, table and wall mount all are made to carry it with the BL7, it might look very funy without it, i.e. you will see cables etc ... If it's the 32" he can use the wall bracket from BV6, else it's always possible to cutoff the to arms for the speaker

David: The Stig - ver. 1.26: peacha: thanks, does the beo port use the aux or would that still be free to allow for connecting DVD? what would the BL3s give more than the BL4000s for the extra £800 or so they are? Beoport use a special B&O connection so the AUX is free. BL3 is between BL4000 and BL8000, BL3 has a disk on the top that makes

Good luck to you Andy, I think you are bit of a perfectionist so it's going to be some very good speakers