[quote user="ClausMikkelsen"] I can stop a recording by pressing STOP and then A.MEM. [/quote] Interesting - I have to press "A.MEM" and then "STOP" to terminate a recording session ...

[quote user="TWG"] If I knew how complicated it is to remove the glass, I will do it myself until I AM happy :-) [/quote] I'd try to find a solution with the dealer/service center - maybe the just had a shortage in air dust cleaner ;-) If you want to do it yourself - the installation manual for replacing the glass points out explicitly

[quote user="elephant"] And vuvu blasts for Vienna , BeoCool, PhilLondo n, JandyT, and Jaff [/quote] *g* 13 hours and 21 minutes after your post (yesterday, about lunchtime CET) I clearly heard the sound of a vuvu arriving from south-east. Thanks!

[quote user="TWG"] What to do? Return to my dealer and let him try it until I have a complete dust free unit or is it nearly impossible without doint the work in a Hightech clean room from a chip manufacturer? :-) [/quote] In a certain manner you gave the answer - a cleanroom isn't standard equipment for a dealer/service center ... If

[quote user="Hiort"] Can I update my BV10 myself, or does this has to be done by service tool? When was Build 127 released? I do not have DVB-HD installed, but I want the possibility to name sources. [/quote] - You'll need the service tool (and your dealer/service) - Beginning of the month

[quote user="TWG"] Im Normalbetrieb fällt es nicht auf, wenn ich mit der Taschenlampe auf das Glas leuchte bekomme ich einen Anfall :-) Vielleicht könnten die Beosound 5 Besitzer hier auch mal prüfen wie's bei Ihnen so aussieht wenn man mit der Taschenlampe mal auf's Glas leuchtet. [/quote] ... ähnlich ... Eine

All roads lead to Rome ... er ... Struer

[quote user="BeoGreg"] the latest software update (build 126) wich do a great job for the "clouding issue" [/quote] Build 126 for BV8-40 BV10-40/46 (C2 chassis) has been withdrawn (removed from the service tool) andhas been replaced by Build 127 Build 127 fixes the DVB-HD blocking problem (if Radio and then standby was selected)

[quote user="Silou"] Hi Vienna, Does the BLb3500 starting (with SW3.1) if it isn't connected to the ML? In other words if you just put the 230V and press A.Aux, is the BL3500 starting? thank's Regards [/quote] My BLb3500 (SW3.1) is wall mounted - so it's not easy to check it w/o ML-Cable attached! It can be started from Sys-Stby

[quote user="Stan"] What I have done in the past is buy a long run of ML cable (without plugs, as long as you need to get from BM5 to BL3500), then buy a short (1 Meter) ML cable (with plugs) and two ML junction boxes. Instead of using a special tool to add the plug to the cable, I just cut the short cable in 1/2 and then use the junction