You can only change the page layout if the page is empty! So: Move every button on the page to the temporary box on the right. After this you can change the page layout to 3x3 instead of 4x3. Than you can move the buttons back again and arrange them like you want.

Hi Keith, now my programming works with icons only for the zones and for the stations. It's not what I wished but it works. My configuration file is still ca. 3MB on the PC but it transfers without problems to the Beo 5. I can't realy understand this ;-)

Hi, I have some trouble with the option programming of the Beo 5: Configuration in the livingroom: - Avant (stand alone) - BS 3000 (audio master) - BS 5 (no audio master, linked to BS 3000 via Masterlink) I set the options in the configuration tool as follows: - Avant: "2 receivers in the same main room" - BS 3000: "2 receivers in the

Hello, I have to pick it up again: When I select an album the Beosound 5 stops after the last track. Is there any opportunity to switch REPEAT on or off? When I play one specific track from an album MOTS starts and works. And some times my Beosound 5 doesn't wake up when I touch the wheel or controller in standby: Is this normal?

I didn't refer to covers of the original album: The BS 5 uses default pictures if it can not find any album cover and I changed the systems default picture!

Good morning, if only the coil is misaligned due to overheating (how many neighbours heard your music before the speaker was defective? ), you can try to fix it with a hair dryer - yes, you've read right. Remove the speaker chassis out of the Beolab 5, than you have to feel from which side of the chassis this noise is coming by gently(!) pushing

Hi, I've just discovered the following: If your music has NO cover, the Beosound 5 shows a default cover (white sphere or s.th. like this). It is possible to exchange that for your own picture :-) There are 3 files in the Beomaster/Data directory: - 0coverDefaultSmall (PNG) - 0coverDefaultMedium (JPG) - 0coverDefaultLarge (PNG) You can replace these

Paul, you're right: My System update (BM 5 OS Update) shows 5.00. If I manualy search for an update there's nothing. Perhaps I should leave it connected to the internet... but leaving a Windows System connected to the internet nonstop is like removing the doors from your house at home and invite some burglars :-) I fixed the problem with multiple

Hi, I did what you told me: I set both products to option 1 in the config tool "Two IR receivers in the same Main room". After sending the configuration to my Beo 5 I switched the Beo 5 to "option programming". As soon as I press the button "living room" the BS 3000 and the avant blink; than the Avant switches on. After

it's not possible for me: I connected it to the internet today and checked manualy for new software in the service menu: No new software available! Beomaster / Beosound Software is still 4.x Does anyone else have the same problem?