I would go for Video 1 as regards the MX 4002. Not quite sure about the LX 6000 but Video 1 probably best suited here as well.

Sure looks like an original BV7-32 or possibly 7-40 monitor (i.e. without DVD/Blue-Ray) to me. Quite sure the speaker stand is original B&O as well.

...and it works like a charm. Many thanks for your assistance. /Emil

Dear all, Is it possible to connect the BS5 to a BV7, speakers connected to BV7, and still have audio from the speakers without having to push PC on the Beo4? I used to have a BS3200 connected to the system as well and then there was no problem at all. Now there is is no audio unless I activate the PC function of the BV7. BS5 is registered as audio

The Stig ver 1.7? Last post april 2009. Always very willing to assist as far as I can remember.

Would a BM5 connected to a BV 7-32 via DVI and a BV6-26 as linkroom tv give the same problem, i.e. must the BM5 and the BV7-32 be connected via composite? I understand that HDMI sources are not linkable but are not sure whether the same applies for DVI? /Emil

Just an idea but have you connected the SPDIF cable between the BV5 and the DVD1? Regards, Emil

Hi, I think that might be the problem. If the signal is picked up by both the BS 3200 and the BL 3500 one push on your Beo4 will make the BS 3200 to skip two tracks. Try to disconnect the BL 3500 from the mains or cover the IR sensor and see if that helps. Should that be the case you can change the audio option of your BL 3500 to only respond to link

Old thread but if the problem is still there - have you thought whether the IR signal is picked up by the BL 3500 as well? Regards, Emil

Hej Ulldal, Jag antar också att det är B&O versionen av Serene du har? Det fanns ju vissa versioner som såldes av Samsung där dockningsstationen saknade möjlighet att ansluta till Beoline. Hälsningar Emil