Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 58 of 269 (2688 items) « First ... < Previous 56 57 58 59 60 Next > ... Last »
  • Re: Beolab 5 + 3 - What Amp ?

    I Think Bluemist wants an amp which will do the decoding, to which he can connect the BeoLab 5s and 3s from the un-powered outputs! I've always considered Rotel to be among the best when it comes to producing good quality surround sound amps which won't break the bank. I own an older RSX-1055 myself, which is practically faultless! Performs very well
    Posted to General Forum (Forum) by Alex on 12-16-2008
  • Re: Access Pc on BV7 with Beolink 1000

    Shift + Store should work on any BeoLink 1000.
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: BeoVision 7 40" LCD Smearing

    moxxey: Alex: Check with the dealer whether it was a mk2 or a mk3! The mk2 does smear a little, whilst the mk3 doesn't at all Yes it does. It's quite clear on fast-moving football, for example. Ok, it's no way near as bad as my old MKI BV7-32, but it definitely does 'smear' slightly. There's a far bit of blur around the ball
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: Utilising my B&O equipemnt with a non B&O TV

    Unfortunately you will end up with no surround sound, unless you invest in a good surround sound decoder. Sony make good, cheap, reliable decoders, and as long as they have 'pre-outs' you'll be fine. However, you will lose a lot of the functionality of the B&O kit, and it'll function like an entirely non-B&O setup.
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: BeoVision 7 40" LCD Smearing

    Check with the dealer whether it was a mk2 or a mk3! The mk2 does smear a little, whilst the mk3 doesn't at all (although there is still a little motion juddering, but it's minimal).
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: Strange BL8000 placment !

    A pair of upside-down 8000s was done somewhere here in Bath quite a few years ago I think. Works very well as long as the ceiling isn't just plasterboard underneath the joists!
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: beosound 4 and beolab 2

    Usually however, installers tend to wire a PowerLink junction themselves, which is more discrete and much more reliable when done properly.
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: B&O BlueRay

    Puncher: Alex: Streamed content isn't going to work for me at all - my internet runs at 0.5mb at the best of times! Some of our neighbours still can't get broadband. Same here - you have to make the most of it by not downloading cr4p I'll try and keep my posts as short as possible then shall I?
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: Beovision 4 progressive scan?

    The BeoVision 4 is 1080p, both the 50" and the 65".
    Posted to General Forum (Forum) by Alex on 12-15-2008
  • Re: B&O BlueRay

    Streamed content isn't going to work for me at all - my internet runs at 0.5mb at the best of times! Some of our neighbours still can't get broadband.
    Posted to General Forum (Forum) by Alex on 12-14-2008
Page 58 of 269 (2688 items) « First ... < Previous 56 57 58 59 60 Next > ... Last »