[quote user="Seanie_230"] Is the MK4 supposed to display 100Hz as i read in the software thread??? [/quote] In your "Customer Service Menue" you'll find "Panel Output" and "100" for a MK4 ("200" when it's a MK5) ! This is the frequency of the panel ! Your figures of 50/47,99 are the frequencies

[quote user="Seanie_230"] How do i enable that? [/quote] menue > options > sound > AST ON/OFF AST thread: http://forum.beoworld.org/forums/p/33197/271117.aspx#271117

[quote user="Seanie_230"] Also i read that there was a fix for room ehco when using devices, when in the customer service menu the ML delay is grayed out under sound adjustment. [/quote] AST has to be enabled to access these settings.

... beauty is, as always, in the eye of the beholder ... ... to the facts: - "Classical" US-American style of the 60's & 70's - 17" aluminium front panel - designed in US / built in Japan - 2 x 30W @ 4 and 8 ohm - build in phonostage - extra feature is an additional tone control for midrange - wooden cabinet was available

[quote user="bentleybaz"] thank you very much for that, i have tried it , no TWINKLE so will have to do with Link, how do i get that up on my display?? i have 3 different beo4 remotes, the one i am using with this overture is one with SAT AV CD & A.TAPE control, ( older one i guess) [/quote] If you want to connect an additional audiosystem

[quote user="bentleybaz"] any offers / info would be great or just to say " cant have two main sources on same link." [/quote] true - but you can set your Ouverture to "A.Opt" "6" to be a secondary system ... (If it's a very old one you'll need a SW update) Press "LIST" and "OFF" (red

My pleasure! PS: ... jaja, unsere ungeduldigen Lieblingsnachbarn ... *g*

[quote user="richtoy"] So I use A.OPT 0, V.OPT 2 and connect the speakers to the MX5500? [/quote] I'm not sure, but I remember there has been a SW issue for early MX5500/BM4500 and similar setups beeing not capable for a "full" A/V Opt.Setup 0/2 (the two digit readout e.g 0.5 or 2.5 indicates that it might be the old SW version

[quote user="rpaul"]. Switching TV on-off-on does not have any effect. After switching on, the stand moves to the position ... [/quote] As a first step try the following procedure - sometimes it resolves the problem: - unplug the cable to the stand - disconnect (unplug !) power of your TV - wait 1-2 min and reconnect to the mains - w/o stand

[quote user="stotty1111"] Egg on face time, got it wrong ... [/quote] Tony, *g* ... whatsoever has been on your face ... *g* it's a MkIII