Peter, Based on your research it is clear the company uses the same codes for all the models you have highlighted, so the codes you listed previously are clearly going to work, so you are going to need the rest of the commands in either thr short form below or the long form Power------ 900A 006D 0000 0001 009F 57A8 Mute-------- 900A 0068 0000 0001 009F

In answer to your questions:- Your device may not be a TV but it is using the "default" device code for a TV, hence why I said you will need to capture or find the codes for your product and it looks as if you have found them. Both the long form and the short form are fine, the short form is a decode of the long form. The long form is the

Peter, Whilst, your TV uses standard 32 bit NEC protocol and uses the default device code for a TV of HEX 00 and there are some standards for commands, its clear your TV does not use these standard because the standard "Power" code is "12" and you have "57" So, you will need to capture all the codes from your original remote

Unfortunately, there remains several key software bugs in the Configuration Tool which limit the macro functionality, however if you are prepared to manually edit the XML file you will be able to achieve your objective. Please provide further details of exactly what you are trying to achieve and I am sure we can get it working.

Peter, I can confirm that you have correctly captured a valid command. Your captured command is in Pronto HEX format and decodes as follows:- Carrier Frequency is 38,028.8 Hz It uses 32 bit NEC protocol It has a device code of HEX 00 Your "Power" command decodes to HEX 57 I have created an XML file for you to test and use as a template for

The short answer is NO The long answer is because the Beo5 is an “Infrared” remote which uses light to transmit the signals, whereas your Mertik Maxitrol RF remote uses Radio Frequency to transmit signals, so they each use different technologies. If you can find an Infrared to Radio frequency converter, then you could get the Beo5 to control

[quote user="PhilLondon"] I find the colour scheme not contrasted enough... the text is too pale, on a lightly grey background. Find it quite tiring to read. [/quote] Yes, we agree and we will be changing that..

The INBOX(1) notification has never been in the supplied Telligent code, it was added by us. However, when Telligent replaced "PM's" with "Conversations" as is implemented in the current Beoworld site we are running at the moment they took away the SQL table which holds all the unread "PM's" count by user, so the

I did a little research on the three TVix 6500 PUC versions and the following are the observed results:- In the latest version the Title & Bookmark have been modified A slow Backward command has been added The way the repeat command facility works has been modified related to timeout Shuffle has been modified. Normally your dealer would always load

[quote user="js"] [quote user="Puncher"] Individual posts seem to take up a lot more screen area - I can only view two posts at the most without scrolling [/quote] Same here. [/quote] I have done some measurements and compared the same posting on the old forum with the new layout and you are correct the new forum layout means each