|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Time to nail my colours to the mast! I think all column speakers are a compromise. I think if you want the best sound quality, you need to look elsewhere. That goes for all the small volume columns including the Beolab 1, 8000, 6000 and I dare say the Penta. The Penta does have more volume but still has small bass units, all be it 4 of them. The Beolab
-
And on WAF, it would seem the usual problem is the size of the black screen. The depth is usually of little importance.
-
I would get an Avant 32 DVD as a stop gap. It would seem screen size is not paramount and this set offers as good a picture for the majority of your viewing as is possible. I would also see if you can't track down the STB-C for the MX7000 - any UK dealers have one? I think flat screen is still developing as are transmission standards and investing
-
Beolab 1s tend to polarise opinions. They have a superb top end which can appear quite cold and clinical and despite their size, lack ultimate bass despite having 400W powering the bass speakers. They are also huge! If offered a pair for a similar price to 8000s, I would snap them up. they were too expensive new. The Beolab 9 uses the same basic electronic
-
Switch it all off at the mains for 5 minutes and then switch it back on. You will need to know the PIN codes.
-
Of the cartridges I have, the SMMC20EN would seem to be as good as any of them. It is probably 15 if not 20 years younger though! Now I have cleaned the 20CL properly, I'll have another listen! I can't see that it shoule make much difference - unless someone knows better!
-
In the manual I have, scaler contrast has a value of 136
-
Unfortunately I am at work till 6.30 that evening on call. We could have gone in the Prius which is running perfectly!
-
The transfers are just like the transfers one used to get on old Airfix models! However these come as an A4 sheet which you print on. I played around with print settings before making those seen - they are fair only. Once you have printed them, you spray the sheet with several coats of clear lacquer before cutting them out and putting them in water
-
Hopefully there will be places for all beoworlders who want to go!
|
|
|