One last try to get an answer on this question..... . Is the question that difficult? Or is this subject on the 'forbidden topic' list? I would really like to get an answer because I would like to set my PS3 up properly, reducing the amount of used audio options seems to reduce the ticking/plopping sound issues. Bieele

Nice post, I really like it. Hard to see this end up in a commercial product, but it looks very impressive! Bieele

Anyone that can help?

What sampling frequencies can the BV8-40 handle as inputs from a linear PCM source? Linear PCM 2 channels 88.2 MHz Linear PCM 2 channels 176.4 MHz Linear PCM 2 channels 96 MHz Linear PCM 2 channels 192 MHz Linear PCM 5.1 channels 44.1 MHz Linear PCM 5.1 channels 88.2 MHz Linear PCM 5.1 channels 176.4 MHz Linear PCM 5.1 channels 48 MHz Linear PCM 5.1

[quote user="Teletom"] Sinds mei heb ik een BV8-40 en een Humax 5050C welke alleen dmv een HDMI kabel zijn aangesloten. De combinatie werkt uitstekend. Het enige minpunt is dat bij overschakeling van kanalen er altijd een paar kleine 'plofjes' hoorbaar zijn. Dit gebeurt alleen bij digitale ontvangst. Ik las dat iemand behalve een HDMI

I also live in a "modern" building. Lots of concrete and glass. Luckily we have soft material on the floor and soft furniture. Still I also thought about improving the acoustics looking for absorbing materials. This site has a nice product, nice looking acoustic panels, unfortunately the site is only in Dutch: http://www.akoestiekwinkel.nl

Ik heb hetzelfde 'probleem' (en dus ook nog niet verholpen). Overigens heb ik dit ook met gebruik van de PS3; deze zit ook met HDMI aangesloten, lijkt daar vooral op te treden bij het schakelen tussen geluidsystemen (bijvoorbeeld van blueray naar menu of iets dergelijks). Ook ik zou graag een oplossing vinden! Ik spreek mijn dealer binnenkort

[quote user="BEOKNOW"] The sound quality on the BV8 40 is superb compared to the BV8 32, and I would say it is equally as good as the Avant - probably better! [/quote] I agree, the sound was also my main concern when buying the BV8-40. I use it in a setup with BL1/BL2/BL4000 and it works very good. The only thing I notice is that the setup

[quote user="evman140"] Oh no worries graham. My problem however lies in the amplification, there are wires that have been cut, it looks like a lamp cord. I'm assuming this is the problem? [/quote] Sounds like your power amp wires have been cut. Maybe this is done because the speakers were used in a setup where the cables where hidden

"Only 3". Seems to be on the low end for this forum: - Beo 5000 - Beo 4 - Beo 5 Not counting the Beocoms for volume control. Bieele