[quote user="redil"] Regarding the adjustment, Vienna would you have a pointer to the above mentioned documenation [/quote] WB4667 Adjustment Plates.pdf attached

If you are using the "Handle - FM antenna" unplug it. If using an antenna cable to receive FM via cable unplug the cable from the wall outlet as well as from your Century (both sides!). If the problem is caused by external units this may help to verify that problems are caused externally. If so, the source has to be found - otherwise servicing

[quote user="redil"] Regarding the adjustment, Vienna would you have a pointer to the above mentioned documenation, seems that it is not out in the open. May be its accessible only to dealers? If possible I would like to do this rather minor adjustment instead of having to get service again. [/quote] ... the 2 plastic parts and mounting/adjustment

[quote user="redil"] ... the panel is somewhat slanted forward: top is 3mm further away from the wall than the bottom, (the wall itself in perpendicular) can this be adjusted? [/quote] Assuming that you are using a B&O wallbracket type 4667: - there are 2 plastic adjustment plates to adjust = pre-stress the the bracket to avoid vertical

As already mentioned, approx GBP 30 for the IR Blaster cable is an out-dated price from 2008. Simply ask your lokal dealer to check the current price for B&o item/order# 8330352 ...

[quote user="ToeKneeAus"] Any one gone through adding blue ray post-purchase ? Any pit falls (apart from price!) from the experience... [/quote] Slower start up and more noise compared to the DVD are inherent to BD-Drives. BD retrofit kit is working fine - but the following limitations - compared to a factory fitted BD Mk4/5 exist: - no BD

[quote user="stote21"] Thanks my local B&O dealer quoted me £30 for this item, I have gone elsewhere [/quote] EUR 40 has been the price in 2008 - now it's one of the few B&O articles that got significantly cheaper ... Your dealer should have had a look on recent prices ...

It's a standard cable - 3,5mm mono jack. The "original" B&o IR-blaster cable has B&o item/order# 8330352 and retails for approx EUR 9 + VAT

[quote user="david coyne"] When youre in Sydney, the drinks are on me :) [/quote] Thanks for the invitation - would be quite a long way round, unfortunately ... PS: The "AV" trick will only solve delay problems similar to yours - there are other issues causing delays (Dolby, Type of panel/chassis , multiple TVs, ...) that can't

[quote user="Matthew"] Presumably the wireless transmitter can connect into an existing cabled ML set-up? [/quote] YES, the transmitting BL-Wireless as well as the receiving BL-Wireless *) are connected via standard ML-Cable ... *) if used in ML-Mode