We had a new BV10 installed this week. Along with that we had the software updated on our BV7-55. Also purchased a new Beo 4 with the navigation button. On the BV10 if I press menu-options-Beo4 setting I get two options "Navigation Button" and "No Navigation Button". If I highlight "Navigation Button" and press the center

I have also wondered about what an 11 would sound like with 1s.

Wow! That really inspires me to get to work changing the fabric!

I purchased a replacement grill for a Beovision 5 in the same color as the speakers. Plan is to remove the cloth from that grill and use it to replace the blue fabric.

First picture of our new Beovision 10-40. The blue is just temporary.........

Thanks for all of the suggestions. The Sony was an analog tuner. Dealer has suggested I hook up an old VCR with a tuner in it and see if I can get a picture with that.

Tried removing the power, no success.

A is set to cable, B is set to none, and all external devices are set to none. I have not tried removing power, will have a try at that.

Yes, RF in A and run through setup/channel scan. Also tried RF B.

We have been using the component input on our Avant for years. Today the Avant was moved to make room for a new 10-40. My plan was to reconnect the Avant in another room, but to the RF input for cable TV. The Sony TV that was previously connected to Cable TV in that room worked fine so I know the house wiring is OK. I connected the Avant to the Cable