Christophe75: Coolskin: After some trials I downgraded to 1.0 Now it is again 1.5 and tested it with a Lintronic IR sensor. This combination works fine (so far). I disconnected the IR sensor again and till now there are no problems with the BM-Link software. But if I do entounter problems, I will post it here. Thanks for sharing your experience, Coolskin

beobres: How much better-- if any-- is the BL7.1 as a center channel than a pair of BL4000's? Much better. My setup is BL7.1 center and BL4000 front speakers When I switch between speakers the BL7.1 is preferred. Better bass, better clarity etc. etc. [edit: the rear speakers are BL2500 flanking the BS3200]

Beobuddy: Help even, wat is FrontRow? Is dat het draaien van de verticale balk van Album, Artist ed.? FrontRow is een simpele visuele presentatie van iTunes, iPhoto, iDVD en video's. De bediening gaat ongeveer als bij een iPod waarbij per scherm een selectie gemaakt kan worden. De bediening is simpel te doen met een Apple remote. Maar nu dus ook

Update: Eergisteren ook FrontRow op de BV7 laten weergeven. Dit is ook nu mogelijk met een Mac Mini (non-Intel), Beoport + IR sensor. Bediening via BEO4. Zie het Mac forum voor meer info... http://forum.beoworld.org/forums/thread/2054.aspx

Major difference between BV7-32 old and new is the viewing angle. My BV7-32 - dec. 2004 has a viewing angle of approx. 75 degrees without colour fading. Viewing outside the 75 degrees angle the image becomes less coloured. The BV7 nowdays has an improved viewing angle. And there is something with refresh rate? 8ms vs. 16ms.

BeoIce: Who's in Struer on Sunday at about 6:00 or 7:00pm ? This is the time I will arrive there. Perhaps someone wants to have a welcome with me ? Martin After I leave my baggage I'll come over to the Grand Hotel, and have a coca cola with you. I want to be sharp and crisp the next morning. ;-) And later that night I have to drive to my "bed

Hello Coolskin, did you make it work somehow ? I experienced the same problems and downgraded. Regards Harald After some trials I downgraded to 1.0 Now it is again 1.5 and tested it with a Lintronic IR sensor. This combination works fine (so far). I disconnected the IR sensor again and till now there are no problems with the BM-Link software. But if

Luigi: Do you know if it is possible connect 2 IR-eye together in the same connection of beoport? I was thinking the other way around. Find a way to connect Lintronic AND Beoport to 1 IR-eye. Must find out next coming days... BeoPort uses other BEO4 keystrokes than the Lintronic box (connected to the window screens). I'll try to get a cable connector

beoberlin: Coolskin: As you could read I use an old Mac Mini. So no front row for me at the moment. ...not exactly. Do you know the "frontrow enabler" by andrew escobar? Works perfectly, at least on my PB 17" under 10.4.9. Give it a try: http://andrewescobar.com/frontrow Regards, beoberlin Just tried it on the Mac Mini and it is o.k.

beoberlin: Coolskin: As you could read I use an old Mac Mini. So no front row for me at the moment. ...not exactly. Do you know the "frontrow enabler" by andrew escobar? Works perfectly, at least on my PB 17" under 10.4.9. Give it a try: http://andrewescobar.com/frontrow Regards, beoberlin Thanks for the tip. Tried it just moments ago