OK just noticed I cut zoom in on the diagram First thing to do is turn off power to your house so every thing gets reset, and gets new new address on master link. or press st.by 3+ sec. Or I personal think it's a fault with your junction box check ground wires, or better get a master link tester to test the connection.

Sounds like an options setting thats wrong. link TV's has to be option 5 or 6 up to 15 TV's or 21 + 11 With wireless Master TV option 1 or 2 "Only 1" in this option..

Hi David The best way to do it, is with an S/VHS cable and the scart adapter. I think the 16/9 issue is gone with that You will get the best pic with S/VHS.

Look Now

A14BEO: With all due respect, I change MX covers daily, and I can guarantee that you need to use the correct rear tube cover for the age of television, otherwise you do not get a perfect fit, with gaps around the edges Yes but It's an MX3000, and also MX2000 are not worth spending any money on. if it was an MX3500+ then yes, and having in mind a

PD: think the best option is a lintronic box IMO Beonic The tube in LX-MX and AV9000 is very good and has no problems like the bigger 16/9 tubes

Hi I think you should look for two MCL Extra Speaker Kits, that will do it the B&O way

Hi The inner part of the back part is not the same as MX3500 and up! but as I remember some of the screw holes will align but not all, so it's possible to change them...

Hi On a LX4500 you have to save 599Mhz on 40,41,42,43,44 or 30,31,32,33,34 when in TV mode, make sure AV1 and AV2 is set to none.

Hi yes it's true that there is B&O ICE power in samsung phones, but it's not for the speaker! ICE power use more power then a normal amplifier when used for low power amplifying, instead it's used in the transmitter where the power is up to 2 watt.