An hour and a half later..... VOILLA!!! Now the delicate job of gluing begins.....but not today.

Before and after.

A quick clean off with meth's on a piece of kitchen roll and the first driver is foamrot free. Over the sink brush any bits off with a soft dry paintbrush.

Then, from underneath, cut the glue. Fred's instructions shows him using scissors but I don't trust myself. From underneath you can see the line which is the actual edge of the cone and so can cut in a sawing motion following this line.

This will still leave behind some of the old glue (yellowy brown in this photo').

Then, holding the Stanley knife blade at a steep angle, start scraping the black stuff away. It's more of a scraping motion than a cutting one, a bit similar to shaving with a cut-throat razor. Three scrapes then wipe the blade.

And now the bit I'm not looking forward to. To remove the foamrot from the cone is quite time consuming. First, with a cotton bud, I wetted the foamrot with meths. (Keep well away from sink and Fairy liquid ) Sorry, poor photo'.

Much appreciated Chris. I am following the instructions provided by Audiofriends and your instructions are almost word perfect to his! Thanks a lot for that. There is something I need to know that you may be able to help me with. Craig kindly gave me two female plugs to go in the back of the S120s and I will get some cable and pugs for the other end

Welcome to the forum, Klaus Thank you for taking the time to make your first post so interesting. You say you have been following the forum for some years and it makes me wonder, how many others read this regularly and don't sign up? May I be so bold as to ask you what it was that prompted you to join Beoworld today rather than last week/month/year

Well I thought that was very interesing to read and thank you to MultimediaRobert for the link. Amongst the things that I found interesting was the fact that the two B1 stores which sell the most in the whole world are both in Moscow! I am also surprised that there is no mention of BeoX and also wonder who the other highend motor manufacturer is? Bet