I wonder if it worked before. I doubt that. The beolink converter has to be placed between the BV3 and the 2300, without the splitter you've mentioned. By using the spliiter you're messing up the data signals send by either the BV3 or the beogram. Both uses pin 6 and 7 to send data (ground and signal). So I should start, as Stefan mentions,

Check your mids! Most likely your mids suffer with foamrot if they aren't replaced! All the penta's mk I, II and early III's will suffer with foamrot. BTW: only the mkIII has a switch on the bottom to switch between an audiomaster or videomaster.

You're sure that you haven't disconnect a cable inside? As you have to slide the internal chassis outwards, maybe something went wrong?

Start checking your ir-lead by using a camera from your cellphone. You should see the ir-led flashing.

Hallo, welkom! Heb je al eens geprobeerd om beide powerlinkkabels onderling te verwisselen? Bij de oudere dikkere powerlinkkabels kan het namelijk gebeuren dat intern wat draadjes losraken. Dus door trial en error moet je erachter zien te komen.

Ik zie in het servicedoc een schakelaar zitten tussen de uitgang van de versterker en de speakeraansluiting. Enig idee Blackrix wat dat voor een schakelaar is? Wordt die gestuurd door de hoofdtelefoon (lijkt mij niet, maar je weet nooit) Die schakelaar zou mogelijk ook niet goed meer kunnen werken. Board 24.

More specific? The BM/S5 doesn't have wifi. It is possible just to install any USB-Wifi adapter at the back of the BM5. Enter the service mode and you'll get the windows desktop. Install then any adapter you like. Make sure you copy the driverpack from the wifiadapter to a USB stick and copy them to a new folder on the data partition. But a

That s correct. The decoder input doesn t support RGB. So the image is indeed less. So it is a kind of luxery problem. AV supports RGB and data over pin8 where Decoder only suppports composite. Both sources/inputs can use the STB-C though. Hooking the SKY to the HDR1 will also not inprove the image as the HDR1 sends also only the composite through to

[quote user="Raeuber"] Hi, @Beobuddy: It is not possible to assign the camera socket to another command (i.e. PC, V.AUX), the command CAMERA is fix for the camera socket (on Avant and BV 10). [/quote] Thats what I meant by softwareversion. The camera input is just another source like the VTAPE, AV and Decoder. It just lacks the support of

Something missing I think. But Vtape connection with the HDR, (automatically) named Vtape or VMEM in the menu, AV connection connected with BC2, named DVD in the menu, responds to the DVD button and Sky connected to the Decoder, named STB-DTV or STB-VAUX, responds to DTV or VAUX. This should be the setting/setup Bottomline is, VTAPE and AV has datalink