[quote user="Friedmett"] Thank you for your reply. Where do I put the Ml/MCL converter? I mean is it connected to the ML between the Beovisions? [/quote] You can add an ML-MCL converter anywhere in the ML system via a junction box. Stefan

First congratulations to your BG6500 and your BS9000. I would connect the AV9000 and BS9000 via ML in the mainroom as video-/audiomaster in V.OPT 2 and A.OPT 0. Use the BS6500 as a "linksystem" in the office and connect the audio aux port with the AUX in of your BS9000. Now you can listen to your BS6500 in all linkrooms. Connect the LX5500

Did you connect the coax to RF out of the BS2 and to RF in of your BV6? Is your link TV - BV6 - set to V.OPT 6? Are the main room video sources starting up when you press DTV, DVD.... in the linkroom? If audio sources work, ML audio and controlling should be fine. Can you set BV6 channel frequency manually to 599? And is your BS2 set to 599 MHz? You

[quote user="BeoFab"] .... I might be wrong but It seems that the Lintronik 238 does a very similar job compared to the Master Link Gateway. [/quote] I wouldn`t call it "very similiar"...... Stefan

[quote user="Seanie_230"] Stefan without Hijack this thread, can you remove / edit a single line within a macro rather than starting the macro again i cannot find line edit or move up one position. [/quote] I think you got your answer from Michael? Stefan

Sure, you can let the Beo5 do the job. You must make sure that all IR eyes - BV10, projector, screen, light get the commands from your Beo5 macro. May work. I never tried it. The BS3 has a cinema output that can be used as a trigger for the Lintronic box, so the cinema trigger will be distributed from one central point through one single device. I have

Could you please give some more info about your setup? Would be much easier to give some advice.. how will the setup be used? Sure, you want to listen to it, but what kind of music mainly, more background/diner music? Classical? Jazz? Is it your mainroom? Is it just for audio, or will it be part of a video- maybe surround setup? I`m wondering why the

Wenn du eine Audioquelle anwählst, wird automatisch SOUND2 aktiviert, bei Videoquelle SOUND3. Das lässt sich auch nicht ändern. Es lohnt sich sich aber in jedem Fall, zusätzliche Speaker anzuschliessen, der Center ist praktisch eine einzelne BL2500, und da gibt`s schöneres.... Und damit weiter an Ulf... Stefan

In the configuration described in my previous post the Gefen switch will be controled by the PUC of the BV10, not by the Lintronic box. You can route the internal DVB HD modul to the Gefen switch, or use a splitter and a second input of the projector... Stefan

If you can connect a HDMI expander to your BV10 it should work. There is a 4x2 version of the Gefen switcher with four HDMI inputs and two outputs. Connect your HD sources to the four inputs and the first output to BV10, second to the projector. Now you have five HDMI inputs and both panels connected. Let the BV10 control the switcher. To control the