Hi, I have a BV10 and attached to it is a Panasonic Blu-Ray 500GB HDD. The model is DMR-BW880GLK. The model loaded on the tv puc control is Panasonic DMRBS850. The dealer advised this is similar and should work. When using a Beo4 everything works perfectly and I'm able to control most things. The Beo5 has been loaded with the control profile of

Hi Jack, I don't know the software version of my BS9000 but it is around 4-5 years old. It's a MKIII model. I just tested setting a timer and it worked. The TV was on (only because I was watching it) and the BS9000 was in standby. I pressed TIMER on the BS9000 and it took me straight into the programming menu and I was able to program it as

Hi, I have a BV 10 & BS 9000 in our lounge with various link rooms all connected via Masterlink. Even though the BS9000 says 'TV operated' it still controls all the timer functions. I have programmed the timer settings on the BS9000 and then simply use the TV for the Timer on/off function to control the lounge speakers. To me the BS 9000

Press the Stand By button while the unit is off. It does need to be connected to the power though - it won't display the time permanently while on battery power.

I had Beolab 5000's to mount but the concept is the same. I mounted my speakers above the powerpoints. That way I removed the powerpoints and was able to work out whether or not I was able to get the cables to the desired position. The powerlink cables came down from the roof space and the power cables came up from behind the powerpoint. Once I

Hi Stefan, Thanks for your help. Finally got it to work after seeing another post about using GO & Yellow button. In this case it's GO & Red for back and GO & Blue for forward. Logical...... no, but at least it works. Next step is the stand. It's been back for repair but still won't work on my TV. The stand had a short and I'm

Hi, I have just got a BV10-40 and have a Panasonic DMR-BW 880 Blu-Ray recorder 500gb hard drive as the DVD player. The PUC control on the BV10 has the Panasonic DMR-BW 550 (or similar) loaded. It also has the generic Panasonic control for a DVD player loaded as well. I can get most of the functions of the recorder to work but cannot for the life of

Hi, Finally got the front BL5's going. When they were originally connected to the BS9000 I used the original BL5 powerlink cables which were extended by a thick powerlink cable. I replaced the new mk 3 powerlink cable that I had run from the tv with the original extension cable and all is now fine. Thanks everyone for their input. Much appreciated

Hi Lee, Thanks for the response. I'll throw in the beer if you want to come over and get the thing going. I was ready for more than 1 beer after driving 1659 kms over the last 2 days to pick the tv up! The tv was totally powered off when I attached the stand; there was a fair bit of swearing trying to see and reach the sockets from floor level.

Hi, I have just got a new BV 10 and have a couple of issues I need to get sorted. I have a motorised stand that was working but now I cannot get the stand function to work or the tv to even recognise it. When I select 'stand' it now changes the channel! I have tried powering off the tv, turning it off at the power even unplugging the stand,