1st STEP - Option settings are A-OPT "0" and V-OPT "2" 2nd STEP - In addition to the 7-pin A.AUX / DATALINK CABLE a FULLY MOUNTED 8-pin POWERLINK CABLE might be necessary between BC 9500 and 1611 Converter. 3rd STEP - disconnect all units for several minutes from the mains. 4th STEP - ALL AUDIO/VIDEO PRODUCTS in the link system must

[quote user="BeoDrops"] Warum muss der TV zum Service für ein Update? [/quote] Wenn's nur um ein SW-Update geht - sicher nicht! Aber bei komplexen / unklaren Fehlern mit unbekannter Ursache wären mir die Möglichkeiten einer vollausgestatteten Service-Werkstätte mit weit mehr als nur einem Labtop für das SW-Update

[quote user="Saxpy"] Hmm... Maybe I should just set up two different systems in the same room and let one run the tv-system and the other one the audio system. Can't have to many b&o-stereos in one room, right? [/quote] Partially wrong, fortunately ... You can have an audio system (with speakers connected) AND a TV (with / wthout speakers

Leider nein - Service - Chip muss getauscht werden.

"LS": Could be used "STAND ALONE" or as a "LINK SLAVE" to acces sources of a "MAIN-TV / AUDIO System" via ML/Antenna. "L" : If equipped with a ML module it could be used either as a "LINK SLAVE" (V-Opt 5/6) or as a "MAIN-TV" (V-Opt 1/2). "L" : If equipped with an optional

... cheaper cable per m does not necessarily mean lower total costs Generally speaking: - It's easier to make a "nice looking" installation using ML - especially if you crimp the ML plugs directly to the ML-cables without J-boxes (but you will need assistance of your B&O dealer/installer). - If properly installed, a Cat 7 installation

Yes, that's the explanation ... Pin 3 Blue/White and Pin 12 Pink always have to be connected, which happens automatically if you are using a Junction Box or a ML Distributon Box. I personally prefer the use of ML Distributon Boxes instead of J-Boxes or soldering - especially in larger ML setups. 6 ML Cables with Plugs can be connected and easily

Three years of use indicate that they installed an appropriate cable - the speakers would have delivered loud hum immediately when connected to the wrong version! Don't worry, a fully mounted Mk 2 cable (all 8 pins connected, NO TRIANGLE on the plug, cable diameter approx 3.5mm) will work for ALL BeoLabs. Pro-Installers preferably use the FULLY

[quote user="zooropa"] So I ask again! ;) : Is the BV7 mk3 fully upgraded, capabled of converting my hdmi/s/pdif from my mac mini and then distributing it via rf and masterlink. Or is it not? [/quote] BeoVision 7 - Reference Book EU-Version p52 / US-Version p64 explicitly tells: "Distribute sound and picture with BeoLink" "Digital

[quote user="zooropa"] Does anyone know if the BV7 mk3, fully software-upgraded, can convert and distribute digital (HDMI, S/PDIF) via masterlink to my linkrooms? [/quote] Masterlink is an analog stereo system, the sound generated by the HF modulated Video signal for distibuting video sources via antenna cables to other rooms is mono! For