Hi there My Projector displays that it is 24p when going through the BS from my Bluray player The only complaint i have is the judder/panning that you get from the BV7 MK3 so i might change to a MK5 which might/should help with the smoothness of the display

well thats me stumped as i have never seen WAIT on mine before. when i press format 0 the curtains close and display sway to output 2. Maybe your software is older or maybe some of the timers have been changed. You could call a beoliving dealer for some advice i find they can be quite helpful but that does depend on if they want to talk to you because

when you say TV goes off does the red standby light come back on? Format 0 shoudl close the curtains and then the curtains open on the projector. Have you got the projector switched on before you press format 0

ok so under the projector menu can you select generic If no generic just pick one of those projectors and see if you get an output which you shoudl as its just Video beging sent over the DVI. Choose one of those projectors and save once saved use list on the beo4 and get format in the display and press 0 this will swap the display to the projector output

Strange When i go to options then connections i get AV1 AV2 AV3 AV4 AV5 Display 2 are you at the same screen??

OK assuming you hve your projector all connected make sure you have set up generic projector under: Menu > Options > Connections > Display 2 (mine is set to Projector Generic and set resolution) Then with the tv DTV or DVD on select format 0 and the curtains close and should open on your projector Once in there: Menu > Options > Sound

i got stuck with this originally also So configure your tv setup in the normal way via the options. to set up speakers for projector mode (format 0) you need to have the display on the projector and you set the settings for this mode while using the mode.

The Beosystem 3 is built into a BV7. If you have the connectivity for a projector you have a BS3

did it get un-plugged for a while i have had this before. try and go to tv mode and it will most prob ask you for the pin and work properly again

you can see from the stereo at the top of the bottom pic that the 9500 has lots more inside than the 9300 shown below it. I am told that the CD drive in mine is a Philips CMD12.4 which has been ordered from the US of A.