Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
No, but the BC3500 is on which is a 3000 with a turntable plonked on top! The lead from the turntable actually has a DIN plug into the back!
-
Says who! Pretty unlikely at the price and the power they will have. Also will not have the same sized bass speaker area ! I am sure it will be a good product and will be interested to see how it compares to the Zeppelin.
-
The cables between the units should be 7 pin DIN leads but these are normally captive so should be there. You will need 2 pin DIN to speaker wire speaker cables to attach to the Quad speakers. The best remote options would be a MCP5500 or 6500 for programming and a Beolink 1000 for everyday use. Nice system!
-
The usual problem is going to be wear. Obviously not the case with your new MMC2. Axel suggests his cartridges track at a slightly heavier weight - my MMC5000s track best at about 1.3g. In the first event, I would increase the weight. Have you checked that the scale on the tone arm is accurate?
-
Yes, mine did that. Not a huge deal - I agree sounds like something expanding. Mine was on a floor stand.
-
[quote user="sodoi18"] Since we are talking about watts - Is MCL2P now a 60 Watts instead of 30 Watts? [/quote] The MCL2P amplifier is much the same as a BM4500 - so yes!
-
[quote user="sodoi18"] Does that means that if you apply the similar logic (beomaster 5500) the beomaster 4500 watt out put would also double from 55 to 110? How could a change in standard of that drastic impact on watts would or was accepted? [/quote] No, the 4500 doubled from 30 to 55!!! It all depends on the method of measurement. B&O
-
I don't blame you for the confusion. One of the problems is the actual measurement of figures. Around the end of the eighties, B&O started measuring power using different parameters. This caused the Beomaster 5500 to go from being a 55W per channel amplifier to being a 110W per channel amplifier. Clearly nonsense but of no importance as it still
-
Good luck to everyone. Can anyone think of another enthusiast site which has monthly prizes of this nature. A big thank you to PDB and Lee at LifestyleAV for all they give to the site.
-
Well I don't know! I remember my first purchase as a student was a Beomaster 2400, Beogram 1902 and some Beovox P30s. Needed something to get me through the first 2 years of Physiology and Biochemistry. The next three years were far more fun - on the wards practising! Best of luck at the studies. Happy to offer any advice or help you need. I am