|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Welcome to Beoworld, Chas, and congratulations on your purchase! As the owner of two K's and one M, I can assure that the Beomaster 900 is a must have for every serious addict Those old potentiometers can indeed get sticky. The knob is held on the shaft by that little screw; if you remove the knob, you can probably spray on the shaft without further
-
Janklep: I'll have a look for a 14V 80mA instead of 12V. So in yours the powerlamp doens't get brighter when the stereolamp goes off? It does - I thought it is normal, you can't really avoid it with that circuit. The other lamps are indeed 12V / 30 mA, but the dial lamp spec is missing even from the service manual... I calculated from the
-
I used a 14V / 80 mA glass socket (T5 type) bulb for the dial in my Beomaster 2000, and all the lights work as they should (I think...). The circuit is really silly, I wonder what the designers were thinking... Sorry for my poor Dutch
-
burantek: i meant to post here earlier... i see the book is available on amazon-uk... any word on a us release, or might someone be interested in assisting in grabbing a copy over there? Won't they deliver worldwide? At least I have had no problems ordering to Finland from amazon.co.uk. Including this book .
-
a2bur: I thought Blu-ray was all the same and was the system that decided how to display it . Just like DVD, Blu-Ray can support a number of resolutions and progressive or interlaced image. You player/processor/display can still up- or downscale them if needed. For example, most "Full HD" AVCHD camcorders produce 1440x1080i content instead
-
I have heard only positive things about Good Hifi. The midranges should be still available from B&O and not too expensive (I remember seeing £25 mentioned?), but getting eight of them will still cost a lot of money. I would try refoaming first - these small drivers can't be too difficult - and only get new ones if some of them go wrong
-
moxxey: So far, I've not bought a Blu-ray that isn't 1080p (Full HD)? Titles originally for TV, for example the "Planet Earth" I have, are often 1080i.
-
Christian: I am a bit confused. Is Blu-Ray: HD or Full HD? That depends on the actual title, but it can definitely be Full HD. Most movies are full 1920x1080 @ 24p.
-
I received the automated membership renewal email stating that I need to renew on 08 December. That is indeed the date I joined on, but I didn't upgrade until 27th of February this year. Seems like I will be short of three months or so....?
-
AFAIK, the auto stand-by function relies on Datalink communication with the selected sound source (record/CD/tape player) to know when it has stayed in "stop" mode for more than 30 minutes. Your iPod isn't a B&O source and doesn't know anything about this, so the Beomaster can't know when it is not playing and stays on.
|
|
|