Both the BV8 and the Avant have ML (not sure if ML is standard fitted in BV8, no idea). So just a ML cable should do the job.Less distortion as the signal comes directly from the BV8 in stead of via the amplified and downforced MCL. Its always possible to keep the 1611 for the BC9500.

Sold

Someone interested? For Sale as I upgraded to a BV9 A BV5 with D7 panel and 2 (extra) HD inputs (component and DVI). It has 3 digital audio inputs. But also and only this one, a professionally original BV9 speakers/amplifier in it (2x 250W with ALT) Latest mk4 chassis with latest 16.3 software. http://forum.beoworld.org/forums/t/32124.aspx

Normally you can use a Beomedia 1 with a avant VCR. Instead of the PC command (which the avant most likely doesnt know), you can change the setting from PC to VAux in the setup menu from the BM1. The videosignal can be connected through composite (1 yellow lead) on one of the scarts or via the doorcam/camera input. The problem your facing is the lack

[quote user="stefan"] It is strange that you have such problems with controlling your DB. I had (and have) several boxes, DVD- BD players, mediaplayer (Tvix) connected and controlled via the PUC and everything works fine....(?) [/quote] Same experience here. Had lots of boxes in the past till present, but the DM800 is at this moment the first

The problem lies in a signature in the DM driver of the E2 box. After several times zapping, the box stalks. Most boxes will freeze from the 1st May on. It has nothing to do with your date of image. BTW the DM ipk package causes a lot (here in Holland) of freezes. Most likely the box will not boot. A clean install is then the only way to go. Most boxes

Keep experimenting. Make sure you dont have a leak. BTW beware of the driverproblem since 1 may. update you receiver with the latest software (after 1 may) I'm using Pli. Backup your settings and update the software and afterwards reïnstal your settings.

I have the DM 800HD and the 8000HD. Your problem is the ir-transmitter which sends a (to) strong signal to the receiver. Take a bit of thin white paper. Place it between the sensor and the ir transmitter. This makes the ir signal weaker, but the response far better.

Welke wordt het nu?

Wat een als grap bedoelde opmerking wel kan niet kan veroorzaken Veel plezier er mee! Bedankt voor de info v.w.b. de Dune, top! Zapt de Humax sneller met zijn eigen afstandsbediening dan via de PUC? Zit daar een merkbaar verschil tussen? Ik had laatst een traag reagerende Dreambox 800HD die langzaam reageerde op de PUC. Bij navraag bleek dat infrarood