All products equipped with PIN code protection has a transportation code set by the factory, this is to prevent theft during transportation and should be changed by customer when the product is installed. The dealer can get the transportation PIN from the B&O Retail System, but once the customer has set his/her own code the product will be locked

Around my neck of the woods we have similar problems with crashing. On top of that, the cable box will not switch on when the HDMI is activated - set HDMI to 'no' in the connection menu and everything works fine. We have verified this by testing 3 different BV9's with 4 different SW's, so this issue is not only related to 4.24: With

Hi, less than 100 days (2400 hrs) would be great - more than that would make me drop by a dealer for a quick check of the mechanical parts (tear & wear). Roger

Yes, it is possible to activate Test Mode (TM) and do various things with the BeoSound 3000. TM24 will give you a read-out of the following: Service running counter. First the Stand-by time will appear. Press PLAY to toggle between the different counters. - St. by time - Radio-mode time - CD-mode time - AUX-mode time - ML active time - Theft protection

There are known issues with the STB-C (PUC) for the BeoSystem 3, but they sometimes are of a random nature and difficult to track. As stated above you must use the scart in order to get the STB-C/PUC working. Pin 8 = 0 volt when turning on the BeoVision will let the STB-C/PUC know that the IR ON-command is necessary. When the STB is on, pin 8 is normally

I guess it's like buying a used car - milage is essential (I know of BeoSound 3000's that's been leased to shops that have used them for 12+ hrs a day, but they appear to be in mint condition - but nothing lasts forever) and the condition of the unit will give you some indication of the state it is in. On the other hand I have seen BeoSound

Å sette opp en Beo5 for en kunde kan ta flere timer, så 500 kr er ingen upris - men å gjøre modifikasjoner på et eksisterende oppsett tar bare minutter og burde ikke koste noe. Håper B&O snart slipper en kundeversjon av config-programmet, selv om de nå har sagt at dette ikke vil skje. En forhandler tjener

Strange - my advice would be to get your dealer to swing by with their laptop / service-PC. Your dealer can plug it into the speaker and download the error codes. Roger

Du må normalt legge inn en forsinkelse mellom sifrene, normalt 150-250 ms, for styring av en STB. Roger

Ved å identifisere Front Speakers som BeoLab 5 og samtidig sette subwoofer til "no" vil surround-modulen sende 0.1-signalet til Front Left og Front Right. Eneste tilfellet hvor, så langt jeg kjenner til, dette ikke fungerer er for BeoVision 5 m/DTS US-version. Regner med at du ikke har denne siden du skriver på dansk, men