My doors open about halfway and then they need an assist the rest of the way. prety sure thats kind of how it was when it was new, most likely the grease down in the hinge mechanism is still ok. One thing that happen on the tape side is the lid alignment goes away in part because of the back spreing pushing against it for twenty + years. Also the roll

I order my cassette belts from Dillen as well, plus I already have all the capacitors I need for the recap. Probably start the refurb next week. The cassette belts should not be to dificult a couple mounting screws and a nd a few pin plug ins will need dicconnected then the tape mechanism will pull out. I have replaced belts on a Beocenter 7000. The

Ben - the tilte song from the movie. I saw the movie with my older sister and we pooled our resources and bought the 45 right after that. J/K - Billie Jean for me but I think his best solo LP was "off the wall"

Listening to my rebuilt Beomaster 2400. My favorite of the flats. just a really nice smooth reciever. I have 2 that I have recapped and relamped in the last 6 months with one more to go. At the rate I am going I will have as many as Burantek once had in a few years. Pictured below is one of my favorite setups a BM 2400 BG 1700 BG CDX with a 3 input

Soren Mexico made me do it. Been sitting on a defective 2400 purchased on the cheap last summer. Finally got around to tearing it open and fixing it. Had to canabalize a donor unit for an LDR and the tone control/balace sliders wre intermittant in provideing good contact. Probably fixable but I was lazy and just harvested that whole board as well. Testing

Martin Olsen (Dillen) can supply you with the cap kits, belts etc. I have used his services many times with good results. BTW I picked up a Beocenter 7700 myself a few weeks ago and plan its overhaul next month. I will need to order cassette belts from Dillen myself soon.

Getting my Francoise Hardy fix on the Beosystem 3300 thru iTunes

I was thinking the lessor one way hald held joobie but either or both would do.

The dreaded Beo-Carpet-Goop ! A sure fire guaranteed ass chewing from the SWMBO. In my case it was the ex-SWMBO - it never stops even after they are your ex. Moving on to happy things. Here is a Now working Beosystem 3300 I rescued out of an attic in UA last summer. Total trainwreck - nothing worked and now it mostly all does including the remote Burantek

I am looking for the handheld Beocenter terminal to use with my Beocenter 7700