To clarify, the bulb that needs to be replaced is not the bulb in the sensor arm. The bulb is located in the tone arm carriage below the turntable platter.

I agree with Alex. Absolutely no point as there are only 2 amps in most beomasters with the exception of the 1 quad model but there's not going to be enough power to adequately drive Magnepans. If you have later Beocenters with the master link outputs I'd run them to a pair of Bryston 4Bs. I have a friend with a Magnepan and Bryston combo; it

Hi: I need to replace a 25V 25mA light bulb that sits in the base of the Beogram 4002 tone arm. It provides th servo signal to advance the arm. I've not had much locating replacement bulbs of the right size in the USA. Does anyone have this part? The alternative is to replace the lamp with a yellow or white led which may or may not work. Anybody

Do you remember how much of that was labour?

Hi: Does anyone know how much the glass lid and the brushed aluminum plate for the beosound 9000 costs to replace? Derek

Martin: I found the collar around the aluminum cylinder under the tone arm and shifted ever so slightly. The arm now lowers properly. The deck however still sounds very "thin...." Derek

Thanks Martin! The arm remains parallel throughout the playing of the entire record but does not drop where it hovers. Is this a difficult adjustment to make? Is it mechanical or a trim pot? What about my question regarding the damper mechanism affecting the tracking force? Best, Derek

Hi Martin: On the subject of the 4000 series decks, as you know I recently acquired a 4002. I've got two problems with my deck: 1) When you press the tone arm lift/drop control, is the tone arm supposed to slide over a few millimeters to the left as the needle drops? Unlike my beogram 8000 which will drop the needle directly where I cue the arm

Here's a pretty decent beogram deck being sold for parts one ebay. It is a buy it now with a decent price esp if you are looking for the dust cover or tone arm. http://cgi.ebay.com/Bang-Olufsen-Beogram-Turntable-Parts-or-Fix-4200-4400_W0QQitemZ280157667386QQihZ018QQcategoryZ3283QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Peter: Is the Soundsmith cartridge body of the 20 series made out of plastic or metal? It looks like a molded plastic from the photos. Derek