[quote user="Milton78"] ... once I can locate the serial number ...[/quote] detach the "keyboard" and have a look ...

[quote user="Milton78"] I have been offered to purchase a used BS 9000 with a loose glass plate. [/quote] Best scenario: Glass been opened by force - just needs to be "snapped in" again (some "gentle" force needed, consulting a dealer/service technician recommended) Most likely when items is 10-15 years old: Glue between

[quote user="Flappo"] Is led backlighting really that much better than ccl ? I saw a 7 40 & the 10 46 and thought the 7 had a much more natural looking picture, the 10 while very bright and sharp looked a bit too technicolor for my tastes [/quote] - No, the main advantage of a LED edge-light concept (beeing used in BV10s) is the reduced

[quote user="beolion"] ... going from 32 to 64 backlight zones, and a lot more diodes... [/quote] the BV7/55 in it's MK1 version already has 8*12 = 96 backlight zones with 10 LEDs each segment the MK2 version is going to have 16*32 = 512 zones with 6 LEDs per segment >> 3012 LEDs . (more than 5 times as much zones as the current

[quote user="Razlaw"] Wouldn't it take two Beotimes? one for the 10 and one for the 7 in the other room? [/quote] Maybe the the Play Timer / Wake Up Timer of your BV7 fulfills your requirements - otherwise you'll need a second BeoTime ...

[quote user="Razlaw"] Any option programming solution that will allow me to use the timer on the BV7 and have the Beosound 5 activate the speakers in the room it is in? [/quote] NO, but a BEOTIME "solves" the problem of the missing BV10 timer.

[quote user="julefreund"] ... nach einem Akkuwechsel bei den Beocom 6000 Mobilteilen müssen diese mit einem bestimmten Code wieder angemeldet werden, um den neuen Akku richtig zu laden [/quote] 9#9#9*655 danach "OK"

[quote user="bluemike"] ... it seems as if the MPAV does have IR reciever...and that this is activated when placed on the stand (there is a pin on the top of the stand that gets inserted into the MPAV) [/quote] interesting idea, but the purpose of the pin is simply keeping the MPAV / Overture /... in the right position. Definitely NO IR Sensor

[quote user="beolion"] ... more details, i.e. will the 7-40 be LED based now? [/quote] No

[quote user="linder"] Will these new TVs have a Beonet connector? Will there be an option for an in-built 3D Blu-ray player for the Beovision 7-55 MK2 3D? [/quote] 1) It's still based on a modified Beosytem 3 - no 2) yes