|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
[quote user="camshaft"] I agree - I don't think the idea of the numbers arranged in a circle was so profound that any other phone using the same layout is a "rip off". If I recall even nokia had an older phone years before the serene with the number buttons arranged in a circle. [/quote] That would be Nokia 3650 from 2002. Try
-
Take a closer look inside first. Last summer I bought a Beomaster 4400, which also had one non-working slider. In this case, the actual potentiometer had moved out of place (it's just clipped there), and the fork of the slider didn't reach it. If the 3000 is similar, you might have an easy fix I'm sure spare parts aren't available new
-
[quote user="GDSammet"] Here is a close up image of one of the segments with 1.7v power applied. I used a 105mm macro lens with a 36mm extension tube. The "silicone chip" is less than .5mm in diameter.[/quote] Yes, this is indeed the LED type I was referring to. Although it was still smaller in the early calculators, and the displays
-
[quote user="GDSammet"] I removed the display for volume (two seven segment displays). I used a high power magnifying glass to see the existing "LEDS" on the board. These belong in a museum! [/quote] So what are they actually? Chips bonded in place like in 70's pocket calculators? @auric, I'd love to see those photos. When
-
Well, I like them both - since more than 25 years. I used to be able to say I had all the Springsteen records, but I've slipped a few lately...
-
-
On paper, the Cona doesn't go any lower than the Pentas themselves, so I wonder if it can do any better than just cranking 40-150 Hz up in an equalizer... Maybe it is more linear at high volumes due to the larger driver, but on the other hand, the Pentas have eight of them.
-
Not much special radiogram expertise around I'm afraid - but the bits and pieces separately, i.e Beogram 1000 and Beomaster 900 are both quite common and not too hard to work on, you'll find lots of discussion on them around the forum. I'd want the original speakers to be in good condition, everything else is probably fixable - and if not
-
[quote user="gorissek"] Oh and what should I clean the stylus with? The user manual suggests a "tiny brush" that is supposed to come in the package, but as mine didn't come with it, I'm wondering what are the alternatives? Also, how often should I do it? [/quote] I bought one of these sets - works fine and after a bit of
-
[quote user="Søren Hammer"] Embarrasing passion: Boston, ELO (Yes, The Orchestra) and The Eagles... All my classmates are listening to this awful techno music, and they think that I am strange, just bechause i listen to some forgotten rock 'n' roll all day on a TURNTABLE?! Young people nowadays... [/quote] When I was your age
|
|
|