Hello all . Which way round do the go in my Beo1 , just removed the batteries without taking any notice how they were incerted and then discoverd there are no pos/neg markings anywhere and can't find the book ? Richard

Hi hfat . I thought I read somewhere on here that a delay can be set . Going to see a JVC set-up tomorrow in Cambridge , would like to view some other makes if I can find dealers with demo rooms not to far away . Richard

The set-up I have in mind is to HDMI the 3D played to the Projector direct and a second HDMI ( using a splitter if the player only has one HDMI out ) to the BeoSystem 3 . My concern is that I might get a sound synchronization problem and don’t know if the BeoSystem 3 and be adjusted to match the screen . Have tried my 3D player ( Samsung ) with

Hi hfat . That was my thought , to have a parallel 3D system . Another thought I had was that if I swapped the Projector for a 3D one and feed a normal Blu-ray DVD throu my existing BeoSystem 3 would that work as it dose now , including sound . If so I could then run a buy-pass HDMI just for 3D and program a Beo5 to control the player if needed but

My dealer says the same as you , System 3 has to be replaced , cost £6750 + £3000 for a middle priced projector . Bit heavy just to drive the speakers , might as well buy the cheapest Tv that has the 3D system 3 in it although I don’t’ need a TV as it a dedicated cinema room . An alternative is to add a 3D projector , bypass

Hello All . I’ve got a Cinema with a BeoSystem 3 , Stuart 2.25 Mt. Screen and Samsung 800 projector ( no TV connected ) and can’t seam to get a definitive answer , “ will the mk1 BeoSystem 3 will handle a 3D feed “ ? If not could my System 3 be upgraded , I presume the latest System 3 will as it’s fitted in the latest 3D

Sorted , Did a software update ( was 2.0.2 on the problem ones ) now 3.0.2 . Thought I had the software up to date . The home menu now goes across the screen with stand-by at the bottom of the settings . I also have the Apple tv 2 ( small black box ) , don't like it because the computer has to be on . Thanks for your comments and suggestions .

Hello All . I have three Apple TV’s all connected to B&o tv's but have an issue with two of them . When I go to my pictures and select any folder from the list it shows all the pictures in that folder and then I can Slide Show ( top left ) or select any picture to go full screen . Only one of the Apple TV’s has this , the other two

Hi Hfat . Could a Beo6 be programmed to control the player and projector directly instead of thru the puc table ? I’m not convinced its’ what I want to do , my brother-in-law has a 3D Samsung 50” and 40” Smart TV and have not been that impressed , think it need a big screen in a dark room for the best effect so will have to view

Beojeff . No complaints , it’s the one my B&o recommended and didn’t compare it with the others on the market . The picture is excellent but obviously not so hot on SD , but only use it for HD films on a Stuart 90” screen . All timed by the Beo4 cinema button , projector on then down while it warms up then the screen down . All