And just to be sure: you're using a Beo4? Not a Beo5 where the Radio and Cd buttons are programmed to handle NRadio and NMusic?

Has your system been setup correct? Does your BS3 has the setting under connections: DVD, then after go: B&O Beocenter mkI or II under available DVD-players?

Maybe this will help: http://forum.beoworld.org/forums/p/36905/306377.aspx#306377 The wire you mention, is the digital out from the mainboard to the dgital in of the DAC on the PCI module.

Ok. ML isn't needed for controlling in the linkroom. These (DVD)instructions are send by the scartcable. V-opt 0? Not needed I quess. If you having both in the same room, it's just V-opt2 sending for the BS3 (may also be received by the BC2, and A-opt 0 fot the BC2). I should start by taking the power off for both the BS3 and BC2 for a minute

[quote user="Emil"] A longshot but maybe worth a try - have you checked whether your rc is set to two-way or one-way communication? During the last years of it's active life (screen only shows a few pixels nowadays) my Beolink 5000 could change from two-way to one-way without no particular reason. If you have had no batteries in for a

[quote user="tournedos"] We have the manual here as well ("Reference US Avant"). Mostly the connector panel just looks more comprehensive as all the signals are spread out in different connectors instead of a few SCARTs, but it does have a couple more inputs. [/quote] And it has more STB-C outputs!! That's a big advantage.

How did you connect the Center 2 with the system 3, only by scart? I've had the same setup, both scart and ML were connected.

[quote user="koning"] Ik ga voor een beosound 5. [/quote] En, hoe ver ben je? Speelt de BS5 inmiddels?

Ja, de TVIX kan zowel via de PUC (in de BV9 en andere) en via de STB-C (juiste chip zit in de BV5). De TVIX staat ingesteld als STB(DTV) of STB(VAux) in het menu van de BV5. Bij de BV9 staat hij nu onder VMEM vastgelegd. Vragen over BV5 kunnen via e-mail of een pm.

This would suggest that there are 2 mk's?