STDBY - LIST MENU - GO Versuch`s doch mal mit V.AUX auf der älteren Beo4. Stefan

I just heard it in the news. Another great musician/guitar player gone. A very sad day. Rest in peace. Stefan

If you want AV - DVD program a button like this: 0:000:RADIO:DVD. To get AV function create a button for video source in RADIO mode and vice versa. AV - CD is 0:000:TV:CD. Now it`s a one press function. Hope this helps. Stefan

The cable between BV3 and BL converter is the Masterlink cable. The cable with round 7 PIN plugs between BL converter (AUX LINK) and BC2300 (AUX) is the AUDIO AUX LINK cable. You have added a splitter to the converter`s AUX LINK plug for the Beogram - Your devices are connected: BV3 - BL 1611 - BC2300/Beogram. Now add a Powerlink cable (8 PIN round

[quote user="Peter"] I have now the BV-3 as the master for the the Beo4, which work fine (and has always been working). Nevertheless, its doesn't seem possible to get sound from the BC 2300 when pressing CD or radio on the unit when the speakers are attached on the TV. Believe me, I have tried all combinations.. [/quote] Peter, did you

[quote user="folkdeejay"] Try using listAV-phono. Depends on the BCEN2, but my Bsnd900 opens up its AUX input when listAVphono is used on a beo4 in the main room. ..... [/quote] That was exactly my idea - using AV - A.MEM, because my BS9000 AUX input also starts up by A.MEM. Seems BC2 does not. Stefan

Ok. So maybe this will help: http://www.lintronic.dk/Relay-208.htm BTW: Are you sure your receiver needs 830 Watt...?? Stefan

You can use an LC2 as a switch without dimming function. Press LIGHT-GOTO-0-STORE-3 (or 4) with Beolink 1000. Beo4: LIGHT-SETUP-0-STORE-GO-3 (4) Now your LC2 is an on-off switch. Stefan

[quote user="TerryM"] [quote user="thavn"]I still haven´t solved the Bluray link problem. My local dealer is going to try out some new players this wek I hope. The player has to distribute both digital and analog signal at the same time. My current Pioneer LX52 doesn´t do that.[/quote] Would the Oppo 93 be appropriate

"Bei meinem Beo 7-40 mit Center 7.4 und 4 x Beolab 8000, kann ich bei den Lautsprechereinstellungen im Menu Sequenz nur manuell auswählen. Jedesmal wenn ich versuche auf Automatisch zu stellen, erfolgt keine Änderung und nach dem abspeichern ist wieder nur manuell auf dem Display." Wenn du die Sequenz meinst, nach der du die LS-Kanäle