[quote user="mbee"] BS3 (valid for all BS3 based TVs) SW 7.05 (Build 551) - 02/11/2009 : 1. No menu, no overlay menu, no curtains (Build 548). 2. Menus and OSD disappeared (Build 548). 3. BeoSystem 3 freezes when receiving DTV+CINEMA_OFF from standby (Build 548). 4. TV does not go into standby, and standby diode is blinking (slow flash) (Build

Ok, i use my tv with stofa cable, so maybe this has something to do with it. I will visit my dealer who also use DVB-T in his shop and have a look at his startuptime. Regarding the module, my dealer told me that that the fitted modules are not the same as the one in the MK IV, however we may have misunderstood each other.. Maybe someone on beoworld

Hi Tillquist If it is true that the startuptime on your tv is only 7 sec, that is very very weird. My MKIV has the startuppicture for about 30-40 sec. when turning it on. Furthermore, channelswitching is also very slow, EPG is slow, sometimes it takes about 20 minutes before the channelinformation is present. I know that the module you have had fitted

Hi Martin That is so nice to hear. I was sure it was the new software. I will let my dealer know and have him report back to B&O in Struer. /Ehlerz

Hi Andrea Do yourself a favor and stay away from the module. It does not work AT all as it is supposed to...., It is noisy, slow, lacks basic features, 30 sec. startuptime etc. etc.

Hi All I have just had my 7-40 MK IV SW updated to 7.05. I seem to experience an increase in fannoise after the update. Has anyone else experienced something similar? Before the update, it was not noticeable but now after using the tv for say a couple of hours, after muting my tv, the noise is very annoying and not acceptable. I am having my SW downgraded

[quote user="PhilLondon"] [quote user="Dave"]I thought the 7-32 could tilt?? Yes it can.[/quote] It can turn left and right but not tilt up and down. p. [/quote] Not true, the 7-32 can very well tilt, just not automatically as is the case with 7-40. I am sure that is what you meant aswell PhilLondon, just to clarify. /Ehlerz

Hi David Have you also tried swapping the tv´s in your setup around. I know you say the cabeling should be allright, but just to make sure. The connectors at both ends of the cable can somehow be faulty or what do i know. What if you disconnect all other linktv´s, maybe it is a signal limitation even though 4 linktv´s should be possible

Hi all Just wondering where i can find the information about picture output on my BV 7 Mk IV. Is it possible to see if the Tv outputs 1080i or 1080p in the servicemenu or anywhere else?? Thanks in advance /Ehlerz

So i recieved my order yesterday and must say that i am a bit disappointet. I played with the adapter the whole evening yesterday and never got it to work corretly. Setup is new Mini, Beovision 7-40 MK IV. I get a picture and everything, but the adapter is very unstable. The picture flickers sometimes and sometimes the picture disappears. Only way to