Thank you very much Rich, and the FS is happy it goes with the curtains she says, I'm reclothing a pair of Beovox 3000 panel, dark blue, nearly the original dark blue Beo color. The FS bought some fabric for them, will show pic later, but there I stood firm and didn't give an inch, I was punished with silence for 3 days, I think I'm going

You will need a 3.5 Mm. minijack to connect to the headphone or sound out on your Lap top, this connected to 2 RCA phono plugs, connect the phono plugs to line on the BL 8000 (remember to set the switch to "line"), the sound will depend on the sound card and the quality of your music in your lap top, the BLs will play it like it is. Sound

One more, 3702 red line

[quote user="tournedos"]Lovely - if you like red! [/quote] Gentlemen, I told you the color is maroon (magenta), one of the 5 base colors used in the printing industri, not red, not pink, even a blind man can see that . Here a better pic, hope it comes up better. Beovox 3702 Red Line speaker. No space for velcro

[quote user="orenhefetz"] Hi looking for a preamp to connect my beolab 8000. does anyone know this one: AMC AV81HTc-DD -Preamp any other suggestions? budget around 300-400$ thanks [/quote] The AMC amp has no line level outputs, pay a little more and go for an Onkyo, for 550 USD you can get a TX-NR 708 or 709, these amps gives a lot of posibilities

[quote user="sonavor"] The pegs are not seen either so not work painting. Nice refurbishment of your Beovox 3702 speakers...cool grill covers. I've never heard that model. Are they similar to the S45.2 speakers? I have to say I really like your work on the cabinet refinishing. Both on these speakers and on Beomaster 4000. [/quote] Similar

Paint will peel of when putting on/off the frets, for grill fabric look here

BTW, we call it a M4 x 16 Allen screw.

[quote user="sonavor"] The 10mm cut piece of #14 wall plug is then screwed on to the hex bolt. That whole assembly is screwed into the hole I drilled where the original grill plug was. I started the the new grill plug by hand, then used the hex wrench to tighten...just snug not too tight. [/quote] Good solid mecanical work, done the way I

The frets fits exactly into the box, and instead of making some pegs to fit it, I will glue it with double sided tape at 6 small points, after assambling and tests. Thanks the Gods its Friday, tomorrow onto the BM 4000.