Craig, If you did not register, then N.Radio will not work correctly. It is difficult to say why the registration prompt did not come up. I suggest you may wish to go into c:\Program Files\Beoport\Beonetradio.exe double click on it and see if the N.Radio then comes up and/or the registration prompt

Craig, Let me answer the easy questions first:- 2) The volume control on the PC screen only controls the volume of the powerlink speakers connected directly to the Beoport, so as you apparently do not have any speakers connected to the Beoport, then nothing will happen other than the volume numbers change on the computer screen. 4) I am assuming your

Whilst I have not used the balanced audio from the Masterlink cable to a third party product, it will work PROVIDED The balanced impedance of the input receiver is 2.2 Mega Ohms The receiving power amplifier preamp can accept an audio signal of no more than +1 to -1 volt peak to peak I am not sure why you would wish to do this and if your input preamp

You are correct, these are standard to almost all audio and video products made by most company's. There are some exceptions

Normally 75 ohm aerial plugs are used for FM, but if you have a DAB radio then it will be an "F" plug. For example the Beocentre 6 with FM & DAB has the normal 75 ohm socket for FM and an "F" socket for DAB

Well done and congratulations to all winners this month, its not just the winning is the taking part between prize draws

So, the problem has been with the AVANT since the tube was replaced and I am assuming the problem did not exist with the old tube before it blew or may be you did not notice. Given what you say, the most likely cause of the problem is going to be with the scanning assembly which sits on the neck of the tube and magnetically deflects the tube beams or

I would say that the speed and quality of the response is linked to the type of questions asked. If you contact B&O in Denmark directly by e-mail with a question not related to:- New product announcements "I have a problem why are B&O not fixing it" type of questions Configuration questions when connecting non B&O equipment Sales

Clearly his B&O dealer is likely to have a lavish house as well ...

The suggested battery will be fine and cost around £6