I have the BL3s in a very similar placement in a sitting room. I was concerned as well about the necessity of doing an unusual placement. As Affineur has already mentioned this does limit to some degree the listening area effectiveness. However, I think you will find that the BL3s are very forgiving as you move through the listening area. In my case

On my BS3 it was the lip-sync adjust in the service menu. It caused a a noticeable delay and/or phasing when playing audio throughout the house. The BS3 electronics come preset to a delay of around 110 milliseconds (ms) to compensate for the delay in the Pixelworks video processing. I don't know if it's because of my BS3 software updates (processing

I'm using an old Samsung T-451 but it keeps crashing lately. Also the STB controller via the Beo4 is awkward (yellow=channel up/Blue=Channel down). I understand the reasoning but this makes it ridiculous to keep in the guest room for people unaccustomed to it. I do own the newer Samsung DTBH260F but as of last spring the Avant software couldn't support

burantek: i have just sold my beloved hasselblad v series. film: i am looking at either a hassy h series / or if i jump ship, a mamiya 645 af series digital: still shooting a d50 (but @ daniel: i have shot the oly 510 -and it is a great camera!). i am looking at possibly a digilux or less $ dlux -would like to hear more about them! I was in the same

I'm doing some picture adjustments to a Panasonic D9 panel. As everyone should know any adjustments made in the service menu should be done with extreme discretion and only with proper knowledge and tools. For this reason any picture adjustment that are done are done while the system temporarily disables auto contrast. In my particular case, due to

It seems that there was a way of integrating a security camera at one point into a B&O video system ( someone approaches the door or rings the bell). I've searched the threads and looked at the manuals and can't find any references. Does any one know of any known integration by design? I've got a BS3 and BS1.

I've been amazed at how big of a difference the audio quality has been since I started watching Bluray discs on my system. I know people have debated whether the additional video resolution is justified with the BS3 + BV4 but frankly I'm much more astonished at the improvement in sound quality, realism and detail. Not typically having the attuned

I know 1080i can work out of the ATV into the BS1. I sold my BS1 a while back so it's been a while since I've messed with it. Does anyone know if this was ever a software upgrade issue?

I can't believe nobody has responded to this yet. The components must be connected to the Zektor in a specific fashion. There is more information in these threads: http://forum.beoworld.org/forums/thread/138545.aspx From my understanding the Zektor BS4.1 must be 'trained' to function properly. I believe you need to contact Zektor to get

Don't have a projector. However, I did get the problem to go away by switching the Samsung from 1080p to 720p. The disc is native 1080p and my plasma is 720p. I think this pretty clearly indicates that despite my initial concerns, it is not a problem with the Bluray codecs. This is a relief because I read a review of this disc that gave the picture