Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
[quote user="Puncher"] B&O's own info HERE [/quote] Thought that might have been the 1928 model! Good to see that ICEpower is going from strength to strength. Could be time to buy some B&O shares for the ISA! Graham
-
Don't know whether this 2006 article has been highlighted before........ looks like a tragic end to a Beocenter! Graham
-
3mm x 2.6mm x 1mm chip to do what would have taken maybe one cubic metre at the start of B&O in the 1920's! Graham
-
Any other Serene users still on the forum? My Serene suddenly started making odd motor noises, ending with the motor apparently not working at all and the phone not being fully closeable (i.e. the phone stayed in a half open position and you could feel resistance if you forced it closed.) Even turning off the 'Auto open' did not disengage the
-
[quote user="j0hnbarker"] Hi Graham It's plasterboard on studwork. I was concerned that the horizontal noggins might get in the way and cause too many obstacles on the way down! Anything for an easy life at the moment :) [/quote] Use one of those detector devices to locate the noggins. Usually there's only one about 1m from the floor
-
[quote user="j0hnbarker"]Hi CallenLovely set up you have there! Chasing and plastering does not have my other half's seal of approval unfortunately! I would do it if the decision were mine alone to make!Got to make the best of the situation though, hence my predicament. [/quote] John, You mentioned a partition wall in your original post
-
I was tempted by these badly listed Beocom 6000 phones (6 total) but decided to leave them in the end. Sold for £279. I had emailed the seller who said they were 4 years old, but I couldn't reconcile that with the paint spattered appearance and the two differently shaped pyramid bases. Hopefully someone got a bargain rather than a set of well
-
[quote user="beoaus"] Happy New Year to all.I am using the G.TiVo Puc on my BV740 MKII. Frankly it only just works. The TiVo button is not mapped and the GO 1 thru GO 9 functionality does not work either. My Puc was updated about a year ago and I have the TiVo 320gb version.Is there a new version of the Puc or am I doing something wrong?Thanks
-
[quote user="TripEnglish"] Happy New Year is a red herring implying that we are all observing the gregorian calendar when that is logically fallacious and also it is a straw man in that a year that has not been yet experienced can be concluded in advance to be happy. Oh wait. Wrong thread. Happy New Year everyone!!!! [/quote] OK, that's
-
[quote user="tournedos"] I'm surprised nobody has yet compared the Beosound 8 to the products by GenevaLab. As I have never seen nor heard either, I'm fully qualified to do that now. Going to http://www.genevalab.com/ , I can note the following points: I think I've seen the "display visible through a perforated front grille"