Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
The breaking of the balance control is a very common problem with these BeoMasters (also in BeoMaster 2200, BeoCenter 3300 and 4000) and it has nothing to do with use. The bass and treble control are also almost never used, you change it once and that is it. The breaking is caused by hardening of the plastic because of age. If you can't get a hold
-
Welkom bij Beoworld! Welk schuifje bedoel je, de grijze regelaar waar je het volume mee instelt? Ik zal eens voor je kijken.
-
You have to create an output before the amplifiers in the BeoMaster. You can split the audio-output from the pre-amp in the BeoMaster so you can use both the amplifiers of the BeoMaster for passive speakers and the amplifiers of the Penta's. To make it work the BeoMaster needs to be opened!
-
-
Welk signaal heb je aangeboden via Scart? Als het RGB is kun je volgens mij inderdaad de kleuren niet instellen.....
-
I would first try to connect the Penta's you have now as a BeoVox, so bypass the amp of the Penta. In that way you know if you like the sound of the setup. After that you can make your choise. Many many years ago I have actually made a modification to my BM8000. I have changed the pre-outputs so they were between the pre-amp and the amplifier, so
-
Het menu wordt volgens mij via RGB weergegeven. Probeer eens om een videobron met RGB aan te sluiten en kijk eens of dat wel werkt?
-
Ik vermoed dat VAux2 niet wordt ondersteund als commando in een linksysteem. Kun je het niet eens proberen met VTAPE2?
-
It actually comes in a silvercolored cardboard box. The story on the Beoworld productinformation is actually not right! It says that the volume of a BeoSystem can be controlled with the buttons above the face. The buttons are for switching your audio- or videosystem on or changing the channels, not for changing the volume! For volume you need a BeoCom
-
Het staat niet echt duidelijk in de service-documentatie. Daar zie ik in het menu-overzicht 32-32-44, maar bij de instellingen voor het afregelen staat 32-32-20. Probeer beide eens en kijk eens welke het beste bevalt, de laatste zou ook alleen voor de instelling noodzakelijk zijn. Volgens mij is 32-32-44 standaard voor de meeste B&O televisies.