My sister is having my Bv3 and taking it to Spain but I remember something has to be done to it for Spanish Tv sound . Is this alteration a board or software ? She had an Mx off me a few years ago that also went out there but can't remember what had to be done to that one . Richard

Peter : Not had a problem with this. I just put in the longest single delay and it works. Is the IR blaster in the right spot on the Sky+ box? Which Sky+ box are you using. I now have a Pace which is so much better than my old Amstrad that it hurts! Quiet, quick and reliable. There is a chap on eBay who sells them for about £100 - I bought one

You can put in a stack of delays in the config. program but 450 ms. is the maximum per delay , not certain how long 450 ms. is are we talking 1/2 a second ? Richard

A 20 min. power down has cleared this problem , back to normal except Beo4 Stop still puts it into live pause and I can't remember it doing that before , have never used live pause command and don't know how anyway , should this Stop instruction do that ? Richard

Curious this one , got a Beo5 remote a week or so ago and now the Beo4 doesn't function as it did on Sky+ ( BeoVision 3 ) . Go Red won't record , numbers won't display and Go 1 won't bring up the program list ect. there is no flash on the Sky box . Also when I press Beo4 stop it goes into live pause . The Sky remote works fine , but

Haven't put the delay in yet , will when I re-configure next . It's not the fault of the Beo5 the Tv needs processing time to send the pulse to the sat box . I get a delay problem when using fast forward on recordings in Sky+ , mustn't be to quick with repeated Go Arrow to fast forward ( with a Beo4 ) , have to have a couple of seconds gap

That's Ok then , as long as it can be upgraded . Richard

Hello Keith . I will try it first between the CIFFER_1's as it appears not to like consecutive numbers to quick ( 118 & 119 ) . Richard

Hello Keith . Sorry I didn't make it clear , but do have the Beo5 and config. software . I have put in the delay as suggested but couldn't put it between commands only after the last CIFFER_ in the list ( first CIFFER highlighted blue , click delay and add 200ms , but puts it after the last CIFFER ) , is this correct or do I have to delete the

Hello . Having a problem with Sky+ commands on ITV2 & ITV3 . When either is pressed it seams to miss the middle ' 1 ' in the command , the small Sky+ number box that appears ( same one if you key in numbers on the Beo4 ) shows ' 18- ' but should be 118 and the same for 119 ( 19- ) , it hangs waiting for the last of three numbers