I have real trouble to get the BD35 to work, unfortunately I am unable to locate the IR receiver to control the player with my BS3 & PUC. Any idea where it is? Thanks Karsten

From my point of view the shopping expirience makes the difference! I remember my first time at a B&O shop after the "magic" catched me at a friends house who was a proud owner of a Bs9000, BL8000 and an Avant. I agree with Trip, I knew at that time before I went to the first shop that a BS9000 with some beolabs and a TV will not be a

Scott, with my current setup I faced the same challenge! Wife liked the 7.2, but the two Lab5 said 7.4 or Lab3. So I did an intensive testing with the three different speaker. Suprisingly the lab3 did not work very well as center (at least with the lab5), it always felt ike something is missing. The 7.2 and the 7.4 did a better job as center speaker

From my point of view the performance of beolab 2 is not good enough to support a lab 9. Not in regards to deepnes of the bass or size. When I owned a lab 2 I found it quite hard to setup the subwoofer with the very limited options given by B&O. So I sold it. I would (if you think a sub is needed) consider a subwoofer like the Velodyne's, they

hmmm....recht Interessante Meinungen hier! Ich habe noch einen BV3 und ohne Frage ist die Bildqualität top. Aufgrund der Preisentwicklung wird mein BV3 auch noch seeehr lange bei mit bleiben. Jetzt hat er ins Büro geschafft, mit dem nächsten Innovationsschub wandert dann mein BV4 vom Wohnzimmer ins Büro und der BV3 ins Gästezimmer

holic: The only problem I have with my setup is the deterioration of video image, especially with the black level. Greyscale are not display, all shadows are a solid black, making an image much darker than it should. When I tested with the DVE test pattern, there were no grey bars on the side, only black. This only happens on the 1080p resolution though

I have a TH50-PH10 and it works fine even the current software. I only had to switch off the monitor auto detect (with the auto detect on the BS3 thinks it is a Full HD panel and sends the wrong signal) The G9 and G10 can not be changed to a BV4 as the old panels anymore, this could be done with the old pana screens acording to the service manual (see

With the Stereo Audio part I am 100% happy! Lab5 in the media room are just my best investment in any hifi gear ever. BS9000 with two lab4 is just a piece of art in my kitchen, sound is suprisingly good (very challenging room acustic) and a Lab2000 in the bathroom. The Video part is jst a 80-90%: I am 100% happy with my B3-32 in my office and the BV1

As the BV4 is a Panansonic comercial panel you can plug in more input devices in the slots at the back of the panel. So you could add an 2nd DVI modul. The IR receiver of the panel is at the lower left corner of the fron bezel behind the frame and with a Panasonic remote control or a universal one you could switch the input from 1 to 2. However, this

*Off-Topic* Hallo Greunestee, ich will Dir nicht zu nahe treten, aber nach dem ich dies heute schon in diversen anderen Foren ähnlich "Posts" geshen habe, die Sache, die ich nicht verstehe: warum in einem öffentlichen Forum darauf hinweisen, das jemand eine private PM in seiner Box hat was er doch beim log-in auch sieht? Gruß