[quote user="petermc"] Just had a look how I ran my cables on one of mine. The cables actually come out above the bracket. From memory I drilled the hole in the plaster with a spade bit and then ran the cables. The Masterlink cable was run from the bedroom side and pulled up into the roof space. The power cord was dropped down into the wall

[quote user="Matthew"] It's good to hear someone has successfully gone down this path. I plan on running the cables through exactly as you describe - ML cable from inside the room through the wall and back to a junction box, and power cable back through the other way. [/quote] This is the way I've done it.

[quote user="9 LEE"] ... 'Mrs 9 LEE' ... held a facebook poll amongst her friends as to wether they were hideous or not. Most of her friends voted 'hideous' and she asked for them to leave. They are in my lounge as i type this of course, and are going nowhere. [/quote] Who are "them" and "they"? Your wifes

[quote user="spezializten"] Special BV8 stand =) [/quote] Stolmen!

Hi! I've changed location for my BL3500 and also had problems with the buttons and I've sent it several times to service. So I'm familiar with the mounting. It's no problem doing it on your own. Just be steady and be prepared that its can tip over easy as it's so long and heavy. Watch out so you don't scratch it on the surrounding

[quote user="TripEnglish"] What it really needs is a 7th disc. I mean come on! It's 2010!!! [/quote] Agree! And the maximum volume level could go to 100 as well, not only 80!

Hi! Think this has been talked about before. Use the search function. Try: Avant VCR scart

It sounds like it have no contact with the master (even the clock is set by the master). Do you use master link junction box(es) or just an uncut ML cable? If you have one or more junction box make sure everything is in order. It's very easy to get a cable break inside those when they are moved.

Check the masterlink cable. Sounds like a loose connection.

Jag är ganska säker på att de är identiska, förutom språket. En dansk BeoCom har självklart danska i menyerna. Men det kanske man kan ändra. Jag har bara Mk1 och på dem går det inte att ändra språk. Någon som kan bekräfta?