Well, the good news is that the AVANT came on for a short time asking for the security pin code which means that AVANT itself is properly fine. The converter unit at 300 watts should be fine, but to prove the point I suggest you connect 3 x 100 watt light bulbs to the converter and make sure they light to full brightness, we need to ensure your new

Is there a B&O store at Madurodam ?

Andy, I noted that you do not have BBC Radio Lancashire logo, well you can download it from HERE and get it added by your dealer. There is quite a number of Irish Radio stations logos for download requested by another member (Movie)

The statement made in the french forum is basicly correct, but it all depends on how long you are prepared to wait for the result. Apparently, there is a procedure for formally requesting additions much in the same way as the procedure for adding STB's to the PUC list

As the remote does not transmit "IR" but uses wireless means you would need to use a "Translation box" such as the Lintronics to use it with the Beo5

First I have to say that the bottom "Hard keys" are programmable by your dealer as well as the screen icons, however most dealers so far appear not to touch them and with good reason because of the considerable combinations using the arrow keys alone its easy to make a mistake. But the bottomline is that ANYTHING you can do with a BEO4 with

Unfortunately the Video Heads for this model are no longer available. Also have a look at the thread HERE for more on the VX5000

I disappointed to note that B&O told you that you could not upgrade your Mark I Beocom 6000 because it is not true, in fact B&O make a kit to do just that and I have upgraded dozens of them. Click HERE to see other threads on the subject. If you upgrade your Mark I Beo 6000 to a Mark to with the kit it will still work on a Mark I charger. PM

Peter, The main differences that you will see between the software versions other than the display mostly effects control of linked TV's in the same room as the Beolab 3500. Things like changing TV channel can only be done using the number buttons for example. Basically version 1.0 software did not provide all the Masterlink functions, however if

Mark, There are several adjustments on module 53 relating to picture alienment, however these are not standard user adjustments that you may find on a computer monitor. Normally these only need adjustment after a component replacement. However, before going down that route, I would ask if this problem has just occurred, in other words was the picture