The details related to the firmware update are not known, however the Beo5's has been shipping with firmware version 1.12a and as soon as your dealer goes to download a configuration it will also update the firmware to 1.20a. So, the dealer has to use the configuration software to update the firmware for customers, however this can be done by them

Apparently, if you have Windows XP with Service Pack 2 installed (which means most XP users) and USB Controller type SIS 7001 which is widely used then you will have a problem. I suggest you use a PCI USB card which does NOT use the SIS chipset. Be aware that a lot of vendors use SIS USB chipsets. The problems you get can be varied, but one problem

If you have your phone line enabled with ADSL (Broadband) then every extension must have a microfilter. The quality of these microfilters varies considerably, buying a standard one from your local store for most people is fine, however many lower quality versions have an impact on sound quality which tends to be more noticeable the longer the cable

Well, N.Radio on the new version certainly does work, other than un-installing/installing Beoport have you made any other chnages to your PC during the same time period ? What stations have you tried to connect too ?

I have to say I have never seen or heard of this B&O product. Based on the pictures it appears to be in the Beolab 4500/5000 time frame. This may be an interesting product to purchase for someone who may then wish to copy the manual for Beoworld

The product Peter is talking about is a Microfilter and looks like the following:-

Your question was:- If I have the Beolink Passive connected via the powerlink cable as a simple amplifier for passive speakers, is it on stand by when I don't listen any music or is it in a permanent work ? Answer, when you switch to standby, the passive amplifier switches to standby as well, subject to a correctly wired powerlink socket

Sebastien, I believe the following is the information you are looking for:- Beocenter 6-23. Is it DVI-I? DVI-I connector/audio L-R in Beosystem 3. Is it DVI-D? 2 x DVI-D Female Beovision 4-50 Is it DVI-D? 1 x DVI-D Female (24 pin) Beovision 4-65: Is it DVI-D? 2 x DVI-D Female Beovision 7-40. Is it DVI-D? 1 x DVI-D Female

Martin, I am assuming that when you picked up your Beo5 your dealer also provided the Beo5 Configuration Tool software ? Please confirm.. I will take the easy questions first. With regards to your invented CIFFER_101 I am sorry you cannot do that, you need to do a macro of three commands, so for channel 101 you need TV:CIFFER_1 then TV:CIFFER_0 then

Lee, Do you measure just site hits or do you also measure visits to particular pages so we can understand the most visited pages etc ?