As Peter also suggests, it sounds like a cracked solder joint or a capacitor fault. Martin

Jesper, velkommen til Beoworld ! Prøv først uden tilsluttet udstyr, højttalere osv. så det er Beomaster'en alene. Martin

Steve, Welcome to Beoworld ! The woofers in the RL35 have rubber surrounds and therefore don't suffer from foam rot but it's very common to see cracked solder joints on the crossover filter boards. It's a fairly easy fix. Worth grabbing a capacitor kit and replace the lot while in there. Mogens, I agree with Chris and Friedmett. I can also

I agree with Chris, patience is the key here. Patience and strong coffee. And don't forget masking tape to hold what you've already done. Martin

All PM's are noticed here ! You have one ! Martin

Half a gram is definitely too little and you shouldn't measure the tracking force with the needle guard mounted, that could easily be that half gram. You have to get the right slider part(s). I will have a look in the dungeons but, as said, I'm not sure if I can find any. Maybe someone with a scrapped machine can help here ? Martin

Sandsynligvis een eller flere dårlige lodninger i strømforsyningen og/eller højspændingen. Der er også et par af højspændings-kondensatorerne, som ofte bliver dårlige og bør skiftes. Ikke noget, jeg vil anbefale, at du selv roder med, med mindre du er uddannet elektronik-mand. Der er en reel

A standard tracking force gauge. B&O designed one that came with some new cartridges at some point. Take off the platter. This leaves a "black surface" for the sensor arm to allow lowering of the needle. Press start and land the needle on the gauge. Careful, of course, to keep the carriage from reacting and moving. Use a small block of

Spiros, Congratulations ! Great to know that the speakers ended with a new caring owner. So it's now proven once again that it pays off to visit Beoworld often. Martin

The slider is clear plastic, not unlike the one on the TX2. I have a nice little collection of good used parts, mainly from scrapped machines, and I know that other people here have some too. I'm not sure if I have this part myself, there has been a rush on tangential parts in recent years, but I'm sure that someone else will be able to find