"Das Gerät ist z.Zt ohne jeden Anschluss an Boxen / System. Eine Bedienung über das interne Panel stellt kein Problem dar. Ich hatte vorher die Anlage in Kombination mit einem Beovision4 -50 betrieben." BS9000 schaltet automatisch auf A.OPT 0, wenn keine Beolabs am Powerlink sind. Dagegen soll es extra einen PL - Dummy - Stecker

If you are using the PUC DM800 Vers. 2.00 set your BV10 to navigation button YES and use a Beo4 navi - 1710. Does your DB work properly with the original remote? Stefan

The PUC version 2.XX is meant for the new Beo4 1710 with navigation button, which got two sets of left-right/up-down buttons, that send different commands / for channel up/down and next/previous. But should also work with "older" Beo4s. Try Go - UP , GO - DOWN, GO - LEFT....or disable navigation button in BV10s MENU. Stefan

Maybe you should reset your BS5. When in Standby mode disconnect from the mains for a few minutes and reconnect. BS5/BM5 will automatically start up. Set your BS5 to audiomaster:YES, A.OPT.1, BL5:YES. BL5 setting: L.OPT 0 Check the L/R switches on the back of your BL5s. When you change the spdif cable left - right, you have still no sound on the LEFT

If you have set your BC9300 to A.OPT 1 and the BV7 to V.OPT 1 - this should confirm both systems by a short flash of the standby light - and your computer is assigned as for example V.MEM just press AV - V.MEM and your BC9300 should be powered up, AUX input will be opened and you should hear the sound of your computer... Stefan

Just the same setup I have. Yes, I think too, it`s a ML problem. Audio path in ML is a balanced signal, so one wire might be missing. That results in less volume and thinner sound. So your other sources might have the same problem when being distributed via ML. BM5 spdif out is meant to be connected to your BVs digital input. I have mine connected to

Can you tell us more about your setup/cabling? Your BL5s are connected to BS3 Powerlink out? Your BM5 is connected via ML and stereo analog cable (rca) to BS3? And your CD (BS9000?) is connected via ML to BS3? I`d guess it`s a faulty ML cable (one pin of 3 for the right channel missing...?) or a faulty rca cable - if connected.. Is it a problem from

" Die Interne B&O DVB S Modullösung habe ich abgehakt, der eine Händler kann mir kein Gerät mit SAT vorführen. Der andere rät deutlich zu externen Lösung. HDD Total unnötig, schliesslich habe ich einen HDR1 ... Und bisher konnte ich mit dem alten Reciver via HDR1 aufzeichnen wenn denn einmal gefragt. (selten

Did you try to change your rear and front Powerlink outs. So now the "rear" BL8000 should turn on..? Did you daisychain front Beolabs and rear Beolabs? Stefan

Die SPEAKER 2 Ausgänge an den BM 3500, 4500, 6500, 7000... sind für Linkräume gedacht, zum Anschluss eines MCL - kits (Master Control Link). Mit so einem Kit kannst du dann dein Beosystem im Hauptraum auch von der Küche aus steuern, und natürlich auch ein- ausschalten. Aus dem Grund sind die SPEAKER 2 Anschlüsse auch 3