Welcome to Beoworld ! Yes, you can connect any passive speaker you like. The plugs you need are standard 2-pin DIN (mostly used in Europe), they can almost always be found on Ebay. Martin

There's a transistor (11TR13) between the motor negative lead and ground so don't expect the motor negative lead to be at 0V. About half a volt seems correct. With reference to ground, you should have something like 13-15 Volts on the motor positive lead, that'll be on plug P2 pin 11. If you don't have this voltage, you will have to

Best thing to do is to measure the voltage to the motor after pressing play. Martin

Hi John, There is a motion sensor but check first that the right tape reel actually rotates when the tapeheads engage at play. If it doesn't, the problem is not with the motion sensor but could instead be a seized reel spindle or, more likely, something mechanically incorrect (maybe the belts are not correct or not mounted correctly or both). Could

Sverre, Jeg kan ikke sige med sikkerhed om det er samme type drev, der sidder i din Ouverture, det er det nok ikke hvis laser-makenikken er af den lineære type, men hvis det er samme type servo board (eller et lignende - der findes en håndfuld lidt forskellige), er det meget sandsynligt og bestemt værd at forsøge. Hvis print

If you bought the surrounds from a prof. supplier, they will also have suitable dustcaps. Martin

Yes, they are actually very fine speakers, too often overlooked. You really should put a dustcap on the midrange again. Martin

Hi and welcome to Beoworld ! I can help you with new belts. You have a PM, check your inbox at the top right corner of this page. Martin

Hvis ikke du kan finde en lokalt, kan du købe en af mig. Martin

Velbekomme. Når der har været justeret på 4k7 potentiometeret, er det bydende nødvendigt at justere det på plads igen. Hvordan det gøres er omtalt i servicemanualen. Det er umuligt at gætte sig frem til den rigtige justering og det er heller ikke nok at man kan "huske ca. hvor den stod". Du kan sikkert