Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 208 of 375 (3750 items) « First ... < Previous 206 207 208 209 210 Next > ... Last »
  • Re: Beocenter 9300 CD lid doesn't close properly

    [quote user="riis"] If the problem is dirt in the tracks wouldn't the door open if I helped it a little with a finger? [/quote] The doors don't have any position sensors, the CPU just commands the motors to run for a specific duration. If the lid moves sluggishly, it may not have enough time to reach the end of the travel before the
    Posted to General Forum (Forum) by tournedos on 01-31-2010
  • Re: Beocenter touch panel sensitivity

    [quote user="solderon29"] The '8000 is basically a stripped down '8500.The touch sensors are Bf240 (eq BF199?)transistors,one for each function.If only one function is affected ie volume down,,the transistor for that function or perhaps a resistor in the same circuit is probably noisy.Freezer should prove it. [/quote] Thanks for the
    Posted to The Workbench (Forum) by tournedos on 01-31-2010
  • Re: Beomaster 900K spares available. Free.

    Retain at least the small, easy to remove parts such as the knobs. Somebody will want them sooner or later. If the front panel is in good condition, it might be worth saving as well. And the power transistors, but removing them becomes work already...
    Posted to General Forum (Forum) by tournedos on 01-31-2010
  • Re: iPad + Apple TV = The better Beosound/Beomaster 5 ?

    [quote user="Puncher"] I've done a quick patent search and can't find anything relating to decompression algorithms - are we sure the early talk to which Trip referred wasn't confusing the MOTS algorithm with the codecs? [/quote] MP3 (and derivatives based on similar psychoacoustic models, such as AAC) itself is badly ridden with
    Posted to General Forum (Forum) by tournedos on 01-31-2010
  • Beocenter touch panel sensitivity

    My Beocenter 8000 has developed some problems with the touch panel, which until today worked flawlessly. Apparently at least the "volume down" pad is much too sensitive. It will decrease the volume if I put my hand within 1 cm of that end of the panel, and sometimes even slowly decreases the volume without anybody being near the machine. I
    Posted to The Workbench (Forum) by tournedos on 01-30-2010
  • Re: BM6500 No response to remote!

    You must know everything about options, so nothing about that... I had a BM7000 (well, still have at the GF's place) which had a really lousy remote control range, both in and out. Sometimes it worked relatively well, sometimes I had to take the remote almost next to the front panel to get any reaction. Cured by replacing the caps on the CPU module
    Posted to The Workbench (Forum) by tournedos on 01-30-2010
  • Re: iPad is here!!!!!

    [quote user="dilznik"] Remember when the first iMac came out and people freaked because it only had USB ports? Remember when the iPhone came out and everyone freaked because it didn't do flash? Remember when the MacBook Air came out and it didn't have an optical drive? Remember when iTunes came out and everyone freaked because the
    Posted to General Forum (Forum) by tournedos on 01-30-2010
  • Re: Help with Tuning Beomaster 7000 with MCP 5500

    [quote user="henrik"][quote user="burantek"] Here is the old thread ... no pics after upgrade! [/quote] I can see the pictures. [/quote] Keith must've restored them during the night - they definitely weren't there yesterday. @David, that plug issue is a bit confusing... as far as I understand, a missing blind plug really
    Posted to General Forum (Forum) by tournedos on 01-30-2010
  • Re: Help with Tuning Beomaster 7000 with MCP 5500

    [quote user="Friedmett"] Does a MCP7000 really exist? [/quote] Apparently a small batch was made - in black - to match the black Beosystem 7000. One of the members has one and we even had pictures, but they are probably gone now. I do remember we shouldn't be discussing it since it puts Lee into fits And David, thanks for joining, you'll
    Posted to General Forum (Forum) by tournedos on 01-29-2010
  • Re: Purchased Penta 2 - got Penta 1

    Before I knew about the clips, I used a blunt thin knife to pry off the grilles on mine which worked, but is obviously not the way to do it... (especially not on your own speakers ) But I still can't work out how to properly push the clips open, even if I try! So I agree with Peter, better not open them. Anyway, you can see the drivers through the
    Posted to General Forum (Forum) by tournedos on 01-29-2010
Page 208 of 375 (3750 items) « First ... < Previous 206 207 208 209 210 Next > ... Last »