You need to run test mode 37 Place the unit in test mode like this Wait 20 - 30 sec. after connecting to mains. By means of keyboard from St.by mode: Press Display 0 2 5 8 with no more than 2 sec. between the individual enterings. Then enter 37 Press Standby to exit testmode. Option setting will be returned to 1 and you will have normal keyboard control

You have no option but to order through your B&O dealer who can order it from Struer.

The replacement buttons should still be available as spare parts. According to the service manual on this site the part number is 2776226. I suggest that you check this with another dealer as the part number may be out of date.

I am afraid that spare stainless steel panels are no longer available from B&O. Removing them to refurbish as they are fixed with double sided tape and removal is difficult and results in a very bent and twisted panel. There have been threads on the forum which discussed the possibility of having new panels made but none have been successful to

Dave: Thank you all for the correspondence i will consider all of the above, unfortunately i'm plagued with extreme fussiness, so the gap really gets to me. Goldfrog88, i tried what you said but i don't see how this procedure could work. Seems impossible to me, The doors not closing is internal and the only way to fix it is to tighten those

Kokane81: there is a rubber stop in the middle which stops you from making it possible to shut the doors together fully so doing what i say won't damage anything and got told to do this by B&O. What they said is you get slack in the metal cable which cause the doors not to shut properly and those clamps are there to make slight adjustments.

I am sure you are beating yourself up over nothing. It's a good price and if it's working OK then my advice is to take a chance. Your alternative is pay more for a younger model or ultimately for a new one! I am sure Lee will have one in stock, so will morerthan and so do I. All with warranty but all considerably more expensive. You either pay

The door will not work well with the screws in the transport position. You are quite correct about it being hung up on the disc clamper mechanism. Take the screws out and it should work fine! What did you use to lube the rails?

9 LEE: joeyboygolf: Perish the thought that I should disagree with Lee but here are a couple of thoughts from me! I am very firmly in the "if it aint broke then don't fix it" camp. The cost of replacing the cd drive is not so much and I would take a chance. "Don't look a gift horse in the mouth". If it all works then the

The mute relay commonly goes on one speaker as Peter says. Since the speakers play fine in the Skr2 sockets then I would stake my mortgage on the mute relay. The mute relay, drive belts and strings for the doors, clip for the prop rod and battery are still available from your B&O dealer. The battery is situated near the remote sensor end of the