to refoam, I use plastic film, 0.1 and 0.3 Mm. thick, I cut strips 10x70 mm and put in the strips at 0, 120 and 240 degrees, allways the same at all 3 points, I fill up with the strips until I get a tight fit where the cone still can move in and out, like if you put in a 0.1 at one of the 3 points, the cone wont move freely, but taking the strip out

[quote user="Søren Mexico"] Come on guys and gals, we need more bronce and silver members, this forum is free, and all help you/we get here is free, but now its time to do something for the members on this forum (us), Kieth need a wider base to choose from, so sign up, we will get a faster working forum and I'm shure Kieth has some

Kabler her , og som Søren siger, få fat i en bedre forstærker.

[quote user="pepps"] Huge apologies - I only just found this reply to my comment in the 'speaker refurb' thread. Sorry but my 3702s are 6244s. They're still knackered too :( [/quote] Well late but there, here is the cross over from mine. should be different in yours

There is one point that I dont like with my Onkyo. The preouts are, 270 mV/470 Ohms, this means that I cant drive my BLs to full volume, its good enough for my dayly use but I cant get the volume up to where the windows starts vibrating, Wtih my Beosound 3000 they go way higher to the limit where the protection circuit in the BL 8000 kick in (lowers

This is like a good crime novel, waiting for the clue, exelent job John

I have an Onkyo, connected to BL 8000 front, BL 4000 center, and 2 non coms passive as surround, works like a charm, I used the automatic calibration on the Onkyo, but as you use BL 5s you can set it yourself. BLs are connected to the preouts and the passives to the amped.

My midranges was "sticky" and dirty too, I cleaned very carefully with mineral spirit, and left for a day, now they are clean but still a little (very little) sticky, the Tweeters after cleaning OK. For your bass drivers, clean of the foam, all of it, when clean, try to move the cones again, three fingers centered around the dust cap, and

Hi Rudy, I run firefox myself and no problems. Lately we had some 3702s with strongly bend spiders, that may be your problem, if the foam is all gone and the cones free from the basket there should be no scraping, are the dustcaps in place ? if not you may have dirt in the voice coils. Here a some pics of my 3702s

If only the foam surrounds are gone you should be able to save them and while open change caps in the filters.