[quote user="beolion"]In other words, how does the BL3's knows that there is a BL2 connected that takes care of all lower frequencies? [/quote] Without looping through the BLB2 they won't know. [quote user="beolion"]I guess you normally would connect the BL3 to the PL Out of the BL2, but I can not (easy) do this due to very

[quote user="rgbyhkr"] ... If it does, is there feedback from owners on whether MOTS works significantly better on BS5 ripped librarues vs. pre-existing ones? [/quote] MOTS = MOTS If a BSD/BM5 combo is acting as a Server for a BSD5 Encore, the MOTS calculations have to be made twice. They are calculated and stored on each unit separately

[quote user="sashaz"] ... the ml cable doesn't work on its own. The amp wont do anything with just the ml cable ...[/quote] To find out if your ML/MCL is faulty, try the ML/MCL with a different ML cable directly between your existing audio system and the ML/MCL. As a next step connect the ML/MCL directly to a different audio system.

[quote user="sashaz"] ... changed the amp to the MC/MCL amp and linked it to my overture with a ML and powerlink cable. [/quote] Only ONE CONNECTION is allowed AT THE SAME TIME ! EITHER PowerLink OR MasterLink ! If you connect a PowerLink cable the ML/MCL will work as a power amp, beeing controlled by your audio or video system (the preamp

[quote user="sashaz"] Thank you i have tried bith options but the ir sensor does not change the volume of the ml/mcl output speakers. The sensor does switch the amp off though. [/quote] Did you connect all 5 cables properly to the terminal strip? (Ie if you insert a wire too much - not the wire, just the insulation of the wire will be fastened

[quote user="sashaz"]I have tried to change to option 2 on link setting but my remote doesnt get that option by just holding the list button.[/quote] The right option setting for a ML/MCL converter + IR eye in link room is: "L.Opt 5" or "L.Opt 6" "LIST" >> "OPTION ?" >> "L.OPT"

[quote user="kallasr"] You need some amplifier, B&O recommands MCL2P. [/quote] MCL2P is out of production since years, the recent version is called "ML/MCL Converter" Both versions will need a fully mounted PowerLink cable.

[quote user="EdouardG"] Could someone tell me please how the BL5 & BL9 speakers work? [/quote] *g* Like every electrodynamic loudspeaker they transform electricity into air movements ... *g* [quote user="EdouardG"] I mean, what are the different frequencies of each way (lower bass, upper bass, mid and treble)? [/quote] Crossover

[quote user="Susanna"]I've read a bit about changing options (0 to 1) etc...maybe this is what I need to do?[/quote] Settig the "A.OPT" to "1" will do the trick. If no speakers are connected, a BeoSound 9000 "believes" it is part of an audio-video setup and sets itself to "A.OPT 0" (the IR commands

[quote user="beojeff"] ?! So this beolab marks the end of the DIN powerlink? The end of an era.... [/quote] YES and NO - all FUTURE audio and video products as well as speakers will have RJ 45 sockets instead of DIN 8 for ANALOGUE PowerLink.