Hello! I know, it isn't easy, but i decided to buy a problematic BL7000, and try to repair it! I make some progress, now the LCD is working, and no pixel errors so far!:) The background lighting is still k.o. I measure the voltage between the brown and black wire, but it was 0V. Measure it also on the bottom circuit to ensure there is no defect

Thanks Phil! Me was told, the BL7000 can send a "Stand" command. The BL5000 is just mentioned in the manual from the Television (MX7000), that both remote controlls are able to controll the full functions on this television, so the BL1000 and the BL5000 too. I don't wish to give up, it must work!:) Thanks! Charles

Thanks for the help at first! (This is a excellent forum, btw.:)) I checked out my MX7000: Type 33/86, SW 1.6 (I'm not sure in the "6" in the software version, the sticker is not the best in that point... Manufacturing year should be 1994) For controll, i have two possibility: Beolink 5000 (Type 1620, don't see any software versions

Slightly thread hijack:) I have a similar problem. I started a thread about this but with the MX7000-BL5000 combination. On the end, i wish to use my BL7000 for my MX7000, but my beolink has a lot of problems. (I buy it so.) I think, thetwo way communication don't work from the BL side, maybe this is the known hardware problem with the capacitors

btw., the Beolink 7000 don't wish to give "free" the picture button on the panel, that means, that it don't light. grrrrr...

Oh Dear... Can someone help me out with the 4 pin plug connection diagram? I have a multimeter here, can measure the voltage what is coming out from the TV. Maybe i can put a separate power supply to let work alone the stand too... The only problem what i see now is, that (when i believe the remote control manual) when i press only once the picture

Beovision MX7000! Sorry, i wasn't perfect by the beginning! I try out with longer power off period (totally disconnected from main supply), but still no function. I don't have here the Beolink 1000. Only Beolink 5000 and Beolink 7000 is at home, but I will charge now the 7000, maybe that works! Thanks for the help!!! Charles

Thank you Chris! I have try it, but no success.:( After i unplug everything, i have wait about 30 seconds to ensure, that all the capacitors in the circuits are empty. Maybe i give a try to wait more after disconnect from the main supply. Thanks: Charles

Hello! I have this combination with the Beovision 7000 and the Beolink 5000, and when i connect the 4 pin plug from the motorised stand to the Beovision 7000, then it not works. Manual says, i must press the picture key at once, then it must work with the < and >. But it doesn't.:( Immediatelly after pressing the picture key, the "brilliance"

Hallo Ralf! Das sollte dann aus der VHB Serie stammen, was die 3M Klebeband betrifft. Genaueres weiss ich jetzt auch nicht, muss leider aber das selbe machen...:( Ausserdem es steht noch der Flachfolie reparatur an... ich weiss, komplette Platinentausch, aber ich versuche es trotzdem dieser zu reparieren, mann gibt ja nie auf!:))) Karl