Hmmm okej...och det hörs inget knaster genom högtalarna om du lyssnar nära högtalarna då hörlurarna inte är anslutna? /Fredrik

Hej Kolla så det inte är dålig kontakt i hörlursuttaget eller kabeln till hörlurarna. Ändras knastret om du snurrar lite på hörlurskontakten fram och tillbaka? /Fredrik

[quote user="soundchoice70"] Good to hear its all coming together.... albeit slowly... And nice indeed, some MS150's, you managed to find some congratulations. [/quote] Thanx hehe, yes I have searched for a nice pair of MS150s for years. Cant wait until I can enjoy them together with the 8000 after all these hours in the workshop with

Hi Premiumverum Very well spotted :D Yes I used 10uF tantals in the preamp to replace the 10uF electrolytics in the signal path. I couldnt find any film caps that would fit the spacing on the preamp pcb. The input caps on my "new" output amps are 4.7uF wima film caps as you noticed. My policy through the rebuild of my BM8000 was that I used

Hi and congrats to your BM8000 :D Check the soldering of the carbon composite resistors in the output amps in particular, these resistors run hot during operation and cause the joints to break. Even the PCB tracks can break around the solder pads of these resistors probably due to age and heat. I wouldnt run the BM until this is checked. Remember there

Dont forget there is also an option to use 2 beolab 200 poweramp to power your M70s from the BC9500 through powerlink. /Fredrik

Hi George I use a pair of M70 with new caps inside and I must say that they surprise me all the time. This is a really good speaker imo. They will play deep in bass without the need of a subwoofer too. When positioned right they will do a great job for you, esp for your kind of music. I would like a set of bl3s and a bl11 too - they sound surprisingly

Hi Laurence Its going slowly forwards...havent had so much time lately to be in my workshop. Im going through all the adjustments in the service manual at the moment. So far I have only tested it in my workshop with a pair of beovox 2702 and it sounds really great and powerful. Im very happy with the sound quality After reassembly and adjustments I

Congratulations!!! Very nice modification you have done here. It looks really factory made /Fredrik

Congrats Rhone and all the other winners tonight!!!